查询词典 absolute alcohol

Objective: To observe the effect of CT-gilded puncturing aid injecting absolute alcohol in treatment of huge hepatic cysts.

目的：观察CT引导下穿刺抽液、无水乙醇硬化治疗巨大肝囊肿的效果。

1Give me a bottle of absolute alcohol, please.

请给我一瓶无水酒精。

Objective:To observe therapeutic effect with absolute alcohol treatment for 118 cases renal cyst by percutaneous puncture under ultrasonographic guidance.

目的：观察超声引导下肾穿刺注射无水酒精治疗肾囊肿118例的疗效。

Methods: 88 and 28 cases that were confirmed as simple ovarian cyst and chocolate cyst separately were all treated with ultrasoundguided paracentesis and injection of absolute alcohol.

对临床确诊的单纯性卵巢囊肿88例，巧克力囊肿28例进行穿刺抽液及注入无水酒精硬化治疗。

Meanwhile the influence of the amount of catalyst alkali ethylate and absolute alcohol,the temperature and time of reaction on interesterification was studied.

利用正交试验研究了酯交换法制备卤虾油脂肪酸乙酯的工艺，分析了催化剂用量、反应温度、反应时间、无水乙醇用量等对醇解率的影响。

The dark purple powder color is soluble in water and solution of water and alcohol, but insoluble in oil and absolute alcohol.

此产品为栀子黄与栀子蓝混合而成的淡绿色至深绿色粉末，易溶于水及乙醇水溶液，不溶于有机溶剂。

We also present some data in graphic form, including the consumption of beer in gallons, the consumption of distilled spirits in gallons, and the consumption of absolute alcohol in gallons for beer and spirits, and, in total, for all beverage alcohol.

我们也提出一些数据，图表形式，包括消费啤酒在加仑，消费蒸馏烈酒在加仑，消费无水酒精在加仑啤酒和烈酒，并在总，所有酒精饮料。

Thus a sulphur sol can,, be prepared as follows: a small amount of sulphur is first dissolved in absolute alcohol.

因而硫磺sol 装於罐中，(在冯WEIMARN 以后)，准备如下：小量的硫磺首先被溶化在absolute 酒精里。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

Fresh carrot, tomato and chili were used as test samples, absolute alcohol were used in process of triturating and dehydrating, acetone were used for extraction, all of the alcohol solution and acetone solution were commixed, and the content of β-carotene were directly determined by HPLC.

选用胡萝卜、番茄和红辣椒三种常见新鲜果蔬作为供试品，采用无水乙醇匀浆、脱水，丙酮提取-直接定容的方法制备供试品溶液，使用高效液相色谱法测定供试品中β-胡萝卜素的含量。

But in the course of internationalization, they meet with misunderstanding and puzzlement.

许多企业已经意识到了这一点，但在国际化的进程中，仍存在一些误区与困惑。

Inorder toaccomplish this goal as quickly as possible, we'll beteamingup with anexperienced group of modelers, skinners, and animatorswhosenames willbe announced in the coming weeks.

为了尽快实现这个目标，我们在未来数周内将公布与一些有经验的模型、皮肤、动画制作小组合作。