- 更多网络例句与钢的相关的网络例句 [注：此内容来源于网络，仅供参考]
-
For KISC, the technology shall firstly use high-phosphorus ironstone efficiently which can not completed by the current picking technology or blast furnace process, to greatly reduce ironstone cost that occupies the most proportion of iron and steel production cost, easy cost pressure caused by international and domestic shortage of production materials, induce transportation risk, to assuringly supply KISC with a great deal of cheap raw materials and create great economic profit; Secondly it shall promote KISC to update its products, especially high-added-value products of lowest phosphorus and lowest sulfur, to enhance its ability to adapt market and gain profit; Thirdly it shall improve technical and economic indexes of blast furnace and converter, and be helpful for efficient blast smelting and less-slag melting of converter process; Furthermore the technology shall greatly promote the stable operation of melting process and the control of the production of high-temperature and high-quality casting blank, to realize efficient continuous casting and continuous casting and rolling to improve KISCs production intensification; Finally the technology shall distribute melting functions and optimize production processes, to improve the auto-control of melting and continuous casting, to realize the integrated management of technology, equipment, production organization and management, logistic management, and production running of smelting, continuous casting and rolling.
对昆钢而言，该技术的应用，首先可以经济有效地实现现有采选技术及高炉冶炼所不能完成的高磷铁矿石的利用，大幅度降低在钢铁生产中占绝大比例的原料成本，缓解国际国内生产原料紧张而造成的成本压力，为昆钢创造巨大的经济效益；其次可以促进昆钢产品的升级换代特别是高附加值超低磷、超低硫钢种的开发，增强昆钢的市场适应能力和效益创造能力；再次可促进高炉及转炉技术经济指标的改善，降低生产成本，且利于转炉生产实现高效吹炼和少渣冶炼；此外，该工艺能显著提高冶炼环节的平稳顺行及高温、高质量铸坯生产的可控程度，可实现高效连铸和连铸连轧生产，提高昆钢生产的集约化程度；最后，该工艺能实现冶炼功能的分工和生产流程的优化，可提高昆钢炼钢与连铸生产的计算机自动控制程度，有效促进炼钢—连铸—轧钢的工艺、设备、生产组织和管理、物流管理、生产操作等环节的一体化管理的实现。
-
Based on the research, founded on existing production conditions, production capability and technical natures of KISC, especially its own development requirements, linked with the development trend of the iron and steel industry, fully considering the continuity of equipment upgrade and technical optimization of KISC, guided under principles of validity and benefit, the writer analyses and argues that in current conditions. KISC shall not adopt the hot metal pretreatment of desiliconization, dephosphorization and desulphurization, but the end-point converter process to improve the dephosphorization effect. But according to the development plan of KISC, with its scale development, upgradeof equipment and technical conditions and implementation of a plan to use high-phosphorus ironstone, its more suitable to adopt the converter-shaped pretreatment of desiliconization, dephosphorization and desulphurization.
在此研究基础上，立足昆钢当前生产条件、生产能力和工艺特点，特别是昆钢自身发展需要，结合钢铁工业发展趋势，充分考虑昆钢现行装备改造和工艺优化的延续性，以有效性和经济性原则为指导，分析讨论了在昆钢当前条件下，不适宜采用铁水"三脱"预处理工艺，而宜考虑采用转炉复吹技术以达到改善转炉吹炼过程脱磷效果的目的；而根据昆钢的发展规划，随着昆钢的规模化发展，生产装备及工艺条件的更新改善及利用高磷铁矿计划的实施，则适宜采用转炉型"三脱"预处理技术。
-
Based on the boundary condition and temperature diffusivity determined sectionally, the heating time obtained from calculation is con...
根据金相组织观察及硬度分布测定，确定了45钢的加热系数k=0.9，40Cr钢的k=1.0，T10钢的k=1.0，并指出这三种钢均不需要保温时间。
-
The test results showed that as steel contained 2%~4% Cu,the structure of quenched and tempered steel was sorbite matrix with dispersed rich copper phase;and as Cu content in steel increased from 2% to 4%,the hardness HRC value of quenched and tempered steel increased from 38 to 48,the antibacteria...
实验结果表明，当钢中含2%~4%Cu时，钢淬回火后的组织为索氏体基体上弥散分布富铜相，当钢中铜含量从2%增加至4%时，淬回火后钢的HRC硬度值从38增加到48，大肠杆菌的杀菌率从42%增加到95%，在5%硫酸中致钝电流和电压减少，使钢易于钝化。
-
In this temperature range, medium carbon steel is not weaker than lower and higher carboncontaining steel in resisting crack formation, which reveals that the high susceptiveness of steel slab which contains 0.10%～0.18% of C is not attributed to the d...
在γ单相区低温域，碳含量较低和较高钢试样的延性显著低于碳含量中等钢。而在γ＋α两相域，钢的低延性区域随碳含量的增加向低温方向移动，碳含量较低钢的延性好于碳含量中等和较高钢。
-
Based on the research, founded on existing production conditions, production capability and technical natures of KISC, especially its own development requirements, linked with the development trend of the iron and steel industry, fully considering the continuity of equipment upgrade and technical optimization of KISC, guided under principles of validity and benefit, the writer analyses and argues that in current conditions. KISC shall not adopt the hot metal pretreatment of desiliconization, dephosphorization and desulphurization, but the end-point converter process to improve the dephosphorization effect. But according to the development plan of KISC, with its scale development, upgradeof equipment and technical conditions and implementation of a plan to use high-phosphorus ironstone, its more suitable to adopt the converter-shaped pretreatment of desiliconization, dephosphorization and desulphurization.
在此研究基础上，立足昆钢当前生产条件、生产能力和工艺特点，特别是昆钢自身发展需要，结合钢铁工业发展趋势，充分考虑昆钢现行装备改造和工艺优化的延续性，以有效性和经济性原则为指导，分析讨论了在昆钢当前条件下，不适宜采用铁水&三脱&预处理工艺，而宜考虑采用转炉复吹技术以达到改善转炉吹炼过程脱磷效果的目的；而根据昆钢的发展规划，随着昆钢的规模化发展，生产装备及工艺条件的更新改善及利用高磷铁矿计划的实施，则适宜采用转炉型&三脱&预处理技术。
-
During the actual production, that the oxygen contamination from the crucible material by heat composition increases the oxygen content of molten steel will result in melting losses of the alloys in the molten steel, and will results in more heavier melting losses of the alloys, incontrollable exact chemical content of molten steel, increment of oxide inclusions and bad processability and serviceability, especially in the high strength(σb≥1600MPa) steels and alloys with special performance used in aerospace industry, manufacturing industry for precision instruments and meters, military industry, nuclear industry etc. because these steels usually have a high content of some active alloys such as Ti, V, Nb, Al, RE, etc. and a nearly zero content of dissolved oxygen.
实际生产中，如果炉衬热分解向钢液供氧，势必会造成钢液中合金元素的烧损，尤其是在航空航天、精密仪器仪表制造、军工及核工业部门使用的某些具有特殊性能的高强度(抗拉强度σb≥1600MPa)合金或钢材，因它们通常需要具有较高的活泼合金元素(如Ti、V、Nb、Al、RE等)含量，且钢中溶解氧含量接近于零，炉衬热分解供氧将造成这些合金元素的大量烧损，其结果是钢液化学成分难以精确控制，并增加了氧化物夹杂含量，恶化了钢的加工和使用性能。
-
The activation energy for deformation in W18Cr4V high speed steel, 40CrMnNiMo tool steel for plastic molding and AISI H13 hot-work tool steel are investigated intensively. The investigation shows that the activation energy for deformation of both 40CrMnNiMo tool steel for plastic molding and AISI H13 hot-work tool steel decrease with the increasing of temperature.
分别将这两种钢的变形激活能数学模型用于蠕变模型，并采用这一改进后的蠕变模型对W18Cr4V高速钢和40CrMnNiMo塑模钢的热变形流变应力进行预测，结果表明，此模型不仅能精确描述蠕变条件下工模钢的流变应力变化规律，也能精确描述工模钢非蠕变条件下的流变应力。
-
In high ─ speed steel, molybdenum can replace parts of tungsten.
钼铁是钼与铁的合金，它的主要用途是在炼钢中作为钼元素的加入剂，钢中加入钼可使钢具有均匀的细晶组织，并提高钢的淬透性，有利于消除回火脆性，在高速钢中，钼可代替一部分钨，钼同其他合金元素配合在一起广泛地应用于生产不锈钢、耐热钢、耐酸钢和工具钢，以及具有特殊物理性能的合金，钼加于铸铁里可增大其强度和耐磨性。
-
Investigation on red hardness of both aluminium and common high speed steel as well as tooling quality of screw tap made of the steel shows that tooling quality of screw to tap of aluminium high speed steel is obviously better than that of common high speed steel.
铝高速钢与普通高速钢的红硬性对比试验以及丝锥切削对比的试验研究表明，将铝高速钢用作螺纹工具—丝锥能明显提高其切削性能，从国内矿产资源角度看，开发使用铝高速钢具有其实际意义。
- 更多网络解释与钢的相关的网络解释 [注：此内容来源于网络，仅供参考]
-
steel bluing：钢的发蓝处理
steel bar棒材、条钢、型钢 | steel bluing钢的发蓝处理 | steel brush钢丝刷
-
Pen Drawing：钢笔画
概率论 Probability Theory | 钢笔画 Pen Drawing | 钢的热处理 Heat-Treatment of Steel
-
Harvey Steel：固体渗碳硬化钢
Hardening Of Steel 钢的硬化 | Harvey Steel 固体渗碳硬化钢 | Heat And Corrosion Resistant Steel 耐热防锈钢
-
Heat-Resistant Steel：耐热钢
78、耐热钢 (heat resistant steel) 在高温下既有足够的高温强度,良好的抗氧化性和抗腐蚀性,又有长期组织性质稳定性的钢的总称. 耐热钢主要是一些加入铬(Cr)、硅(Si)、铝(A1)、钼(Mo)、钒(V)、钨(W)、铌(Nb)、钛(Ti)、硼(B)及稀土(Re)等合金元素的合金钢.
-
High-speed steel for razor-sharp edge：超高速钢的锐利边缘
Double-edged, reversible, two cutting edges per knife双面刃,可逆的,两个前沿每... | High-speed steel for razor-sharp edge超高速钢的锐利边缘 | Two year warranty against manufacturing defects二年保固对制造...
-
Dual-Reduction Tinplate：双相辗压镀锡薄钢片(马口铁/白铁皮)
单相轧压镀锡薄铁片(白铁皮/马口铁) Single-Reduced Tinplate | 双相辗压镀锡薄钢片(马口铁/白铁皮) Dual-Reduction Tinplate | 钢的种类 Type of Steel
-
all-steel construction：全钢的
all-service gas mask 防毒面具 | all-steel construction 全钢的 | all-timber door 木门
-
Chrome-Vanadium steel construction will last lifetime：铬钒钢的建设将持续一生
Professional-grade design and components with superior value专... | Chrome-Vanadium steel construction will last lifetime铬钒钢的建设将持续一生 | Black Oxide finish for excellent corrosion resistance黑色...
-
Heat-hardened Chrome-vanadium steel with mirror chrome finish：热硬化铬钒钢的一面镜子,铬完成
Torque-tolerances meet ANSI, DIN and Federal requirements转矩公差满足的ANSI , D... | Heat-hardened Chrome-vanadium steel with mirror chrome finish热硬化铬钒钢的一面镜子,铬完成 | Editorial Review: 编辑审...
-
Steel-Lined：衬钢的
Steel Linear 钢覆面 | Steel Lined 衬钢的 | Steel Liner 钢衬