程序的模

词组短语

module of program

与程序的模相关的网络例句 [注：此内容来源于网络，仅供参考]

This is also a very important process, solving the determinant of the mold.

详细说明：这也是一个很重要的程序，求解行列式的模。

In general, the design work with traditional measures is done by hand, which cannot meet the needs of the technology and manufacture. So the author has developed a CAD hydraulic design software fit for lower specific speed axial flow runner, which is easily operated by users.The main research work of this paper is as follows:1 Analyzing the main reason of axial flow power station cannot work well under littler volume of flow in some season and putting forward an improving scheme, pointing out the characters of design under abnormal factors.2 Combined with the development of the industry in our country, the abnormal hydraulic design method of propeller turbine is discussed based on present literature, data and experiment results.3 Guided by the design method of software engineering, a suit of hydraulic design software of Lower Specific Speed Axial Flow Runner is programmed by the object-oriented programming language Visual Basic and a straightforward, concise and standard Windows human-computer dialogue interface is designed for the system, which makes the operation of the system very convenient.4 ActiveX Automation technology is adopted as the interface with AutoCAD and the hydraulic drawings are edited, modified by AutoCAD until hydraulic model drawings according with the demand of engineering practice are output.5 To resolve practice problem, the author has designed a lower specific speed axial flow runner for Duowa Power Station through an example.

论文的主要内容有：1 深入分析很多轴流定桨式水电站枯水季节小流量下不能发电的主要原因，提出减容改造方案，并指出超常规条件下的改造设计特点。2 结合国情及行业发展需要，参考现有资料、文献和前人的研究成果，进行低比转速轴流式转轮叶片水力设计方法的研究，对轴流式转轮叶片的奇点分布法水力设计进行了全面的探索，结合现代计算机技术，找到了一种针对特殊条件的轴流式转轮叶片水力设计方法。3 仔细比较多种AutoCAD二次开发工具后，结合本课题的特点，选用Visual Basic语言，综合应用软件工程的设计思想，进行低比转速轴流式转轮叶片水力设计软件的编制，为系统设计了直观、简洁和标准的Windows人机对话界面，便于用户操作；编程时在考虑到设计条件特殊性的同时，尽量做到程序的通用性，使之可用于解决同一类问题；另外，大部分程序还可移植到普通轴流式转轮叶片水力设计中，具有良好的适应性。4 利用ActiveX Automation技术与AutoCAD接口，对AutoCAD进行二次开发，在AutoCAD下实现水力图的自动生成和编辑，直至输出符合实际工程要求的木模图。5 通过算例，为多哇水电站设计了一个低比转速轴流定桨式转轮，解决其在枯水期小流量下不能发电的问题。

The calculating accuracy is ensured by expelling oddity points from the results. In part four, rotor life-loss caused by shear stress under torsional moment, turbo-generator rotors' combined vibration of bending and torsion are studied, and the maximum shear stresses of a stimulate rotor of N300MW steam turbine are calculated.

在第3章，重点研究了汽轮发电机组转子扭振机理和数学模型，特别是汽轮机特殊结构的模化方法，编写了计算程序，计算了某型300MW汽轮发电机组转子和试验台转子扭振特性。

On the basis of the presented hydroelastic theory, a computer code HEAF (Hydroelastic Analysis Program for Fast Sea Transportations) is developed to calculate wave loads and dynamic responses of mono-or multi-hull high speed vessels in the frequency and time domain.

在理论研究的基础上，本文作者开发了计算机应用程序HEAF(Hydroelastic Analysis Programfor Fast Sea Transportations)，通过与结构干模态分析程序的数据接口，能够进行线性频域和非线性时域单体或多体高速船舶水弹性分析，可用以计算单体或多体高速船在各种海况下的波浪载荷、船体刚体运动和结构的弹性动力响应。

The disadvantages of modeless applications are: It is more difficult to implement.

非模态的应用程序的劣势：实现比较困难。

The advantages of modeless applications are: A better user experience.

非模态应用程序的好处：更好的用户体验。

After the rigidity matrix calculations, the FEM analysis program ANSYS is used to create models, with the truss structure and box cross-sectioned cantilever board beam as models.

在完成结构刚度矩阵计算的前提下，以桁架结构和矩形截面悬臂板为模型，利用有限元程序ANSYS进行建模，分析了不同类型的结构在温度变化作用下的响应，从而得知温度变化对桁架结构的模态参数影响不大，而对矩形截面悬臂板梁的模态参数有一定的影响。

First, this paper presents three girders model with double cable planes which main girder and side girder is connected by rigid arms, analyzes the dynamic characteristic of Yonghe cable-stayed bridge and obtains its natural vibration modes (i.e., frequency, damping values and the mode shapes ) by ANLSIS structural analysis program and uses these parameters as dynamic dactylogram of the intact case of cable-stayed bridge. Using the passage of random as the ambient vibration ,the dynamic properties of Yonghe Bridge is measured and the modal parameter of its 15 years after is identified and used as dynamic dactylogram of the damaged case. By the finite element analysis and locale vibration test, damaged and undamaged modal parameter is analyzed and curvature mode shape, which is sensitive to damage state, is introduced as possible candidate for identifying and locating damage in the cable-stayed bridge. Selecting the branch of part measured point from modal parameter, this paper deduces the damaged index which can detect the possible damaged location of the cable-stayed bridge deck and identifies the damaged region and degree for Yonghe Bridge. For the purpose of structural condition monitoring in in-situ , from another viewpoint, this paper introduces the method called the best optimization vector to detect damaged location and degree. The accuracy and reliability of the method presented in this paper are demonstrated by static analysis and test and the healthy state of Yonghe Bridge can be evaluated.

建立了双索面通过刚臂与主梁及边梁相连的三梁式力学模型，采用ANSYS结构分析程序对永和斜拉桥进行动力分析，对其振动模态参数进行识别，以此作为斜拉桥完好状态下的动力&指纹&；采用自由交通流作为环境振源，对永和斜拉桥动力特性进行测试，识别出永和斜拉桥使用15年后的模态参数，确立了破损状态下的动力&指纹&；利用有限元分析、现场振动测试，对破损前后的模态参数进行分析，提取对破损状况较敏感的模态曲率作为斜拉桥破损诊断的参数；并从模态参数中选取部分点的分量，导出可以指示斜拉桥桥面大概损伤位置的Index损伤指标，识别出斜拉桥发生破损的区段及破损程度；考虑大型斜拉桥在线监测要求识别破损的具体位置，从另一角度提出采用最优矢量法具体确定破损发生的位置及程度；为验证本文研究成果，对永和斜拉桥进行静力分析及静力测试，对其健康状况提出可靠的评价。

According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。

Good agreement between theoretical prediction and simulation analysis has been achieved. The applicability of this approach to the engineering design of magnetrons has been proved, and evaluation for different structures of the anode block is given by the analysis of mode separation in term of mode spectrum pattemn.

仿真结果表明有限元法程序计算结果与场论计算结果能很好地吻合，证实了本方法用于指导磁控管工程设计的可用性，并给出了评估不同磁控管阳极结构的模式分隔特性的模谱分布图。

与程序的模相关的网络解释 [注：此内容来源于网络，仅供参考]

feasibility：可行性

可行性( 可行性(Feasibility) ) 对过程,设计,程序或计划能否在所要求的时间范围内成功完成的确定. Verification) ) 确保所有的设计输出满足设计输入要求的试验.设计验证可包括以下的活动: 用来确保所有重要项目在制定设计要求时已被考虑的防错检查表.语 84 有限元分析( 有限元分析(Finite Element Analysis) ) 指复杂结构模

memory model：存储模式

KeilC编译器使用的存储模式(memory model)有小模式、紧凑模 式和大模式. 在各个模式下,如果变量没有指定存储类型,默认分别对应data、p data、xdata存储类型. 四种存储类型访问速度依次降低,但是可用空间依次增多. 稍大的C程序有较多的外部变量,

mod：模运算

远远不够,要想得到最快的算法,就不能进行逐个的比较,通常是构造一个哈希表(HashTable)来解决问题,哈希表是一个大数组,这个数组的容量根据程序的要求来定义,例如1024,每一个Hash值通过取模运算(mod)对应到数组中的一个位置,

module of homomorphisms：同态模

module of boundaries 边界模 | module of homomorphisms 同态模 | module of program 程序的模

module of program：程序的模

module of homomorphisms 同态模 | module of program 程序的模 | module of quotients 商模

module of quotients：商模

module of program 程序的模 | module of quotients 商模 | moduli space 参模空间

modulo：模运算

本章提供了一些生动的破解范例. 作者将分析一些程序,并试着去破解它们. 这一节是围绕附录B理解编译后的算术运算中的模运算(Modulo)来阐述的. B.2.3 模运算(Modulo)

Pipe：导管

我们发展了一个简单的以Perl为基础的资料交换格式,叫做"boulderio",这格式允许松散连结的程序加入资讯到以导管(pipe)为基础的输入/输入字串流. Boulderio的基础是一对一对标签/值. Perl模组让获得输入很容易,取出他们有兴趣的标签,

tensile test：拉伸试验

然而,由于拉伸试验以外的其它测试程序先天上都有准确性的问题,使得塑料材料往往只提供短期的拉伸试验(tensile test)结果. 读者如果有其它负荷状态的应用,应参阅相关的文献数据. 杨氏模数经常被用作材料强度指标.

modules：模组

而且最早被发表为撰 写Windows CGI 程序的标 准,同时该语言支持许 多Windows 环 境:例 如OLE, DDE,Sockets, ODBC 等;此 外,VB 应用程序可在不需要窗 体(windows forms)而只在模 组(modules)的环境下开 发,十