层压

基本解释 (translations)

laminating

与层压相关的网络例句 [注：此内容来源于网络，仅供参考]

The pressure drop of the compound tray can be regarded as consisting of dry plate pressure drop, clear liquid resistance, liquid surface tension resistance, and packing pressure drop. The model that has established can fairly predict the pressure drop of the compound tray, the value calculated by the model compared with that detected by experiment is less than 20%.

复合塔板的压降可认为由干板压降、清液层阻力、填料层压降和克服液体表面张力的压降四部分组成，所建立的压降计算模型，能较好地预测复合塔板的压降，计算值与实验值误差在±20％以内，可用于工程设计。

Results show that glass fiber cloth laminate exhibited improved mechanical properties, which can be maintained even at high temperature of 150℃, with respect to conventional phenolic laminate.

结果表明，玻璃纤维布层压板的力学性能比普通酚醛树脂层压板有明显提高，在大于150℃高温下其性能仍能较好保持。

The silicon solar modules produced by our company may fall into two kinds, that is, large power modules (ranging from 10wp-165wp) and small power modules (ranging form 0.1wp-10wp). The former mainly uses reinforced glass and aluminum alloy rim. It ischaracterized by large power, high conversion efficiency and long service life. It is widely used in the off-grid solar system,on-gridsolar system, household generating and lighting system, traffic lights and solar lighting lamps; the latter chooses quality importedmonocrystalline or polycrystalline silicon solar chips, using solar resin gum for sealing and PET lamination or glass lamination sealing.It is characterized by portability, flexibility, beautiful appearance, and excellent performance. It is mainly applied to solar lawn lamps,portable power solar handicrafts, electric toys and other small electronic and electrical appliances.

我公司生产的硅太阳能电池组件可分为：大功率组件（从10wp-215wp）：主要采用钢化玻璃、铝合金边框封装，具有功率大、转换效率高、寿命长等特点，广泛应用于：独立光伏电站、通讯电源系统、户用发电照明系统、交通信号和太阳能照明灯具等；小功率组件（从0.1wp-10wp）：选用优质进口单晶或多晶硅太阳能电池芯片，采用太阳能树脂胶封装、PET层压或玻璃层压封装，具有使用轻便灵活、外形美观、电性能优良等特点，主要适用于太阳能草坪灯、便携式电源、太阳能充电器、太阳能工艺品、电动玩具和其他小型电子电器产品。

Rubber machinepricision performer of rubber product,testing machine,fuel battery test press,double-unit vacuum molding machine,strapper for rubber joint.etc.

产品包括：橡胶机械（精密预成型机、平板硫化机、各种试验压机、燃料电池压机），电子机械（二极管注压机、高频预热机、线路板层压机、流动测试仪），木业机械（中密度板框式压机、可降解一次性餐具压机、自动进卸料送板机）及各种非标液压设备。

Curwood's Dave Engen, market manager for cheese, describes the Curpolene 7202 film as a 2.6-mil, two-ply, coextruded lamination of oriented polyethylene terephthalate, laminated to a proprietary ethylene vinyl alcohol/nylon coex that offers superior resistance to heat and abuse, as well as superior machinability, and barriers and esthetics for nonrespiring sliced cheeses like Provolone and Cheddar.

curwood的戴夫Engen的，市场经理，奶酪，描述curpolene 7202电影作为一个2.6万桶， 2层，共挤层压面向聚对苯二甲酸乙二醇酯，层压到一个专有的乙烯-乙烯醇/尼龙国际会展中心，提供优越的抗高温和虐待，以及优越的可加工性，和障碍，美学为nonrespiring切片奶酪一样， provolone和干酪。

Combining the fluid mechanics in porous medium and the geometry, the author considers the artificial barrier as a filter cake, research on the vadose rule on the condition of the coercibility and the non-Newtonian fluid flow, establish the formula of artificial barrier pressure drop and thickness, probe the formula of the thickness of artificial barrier for the pressure in the fracture,the coercibility, the smallest stress of barrier and the rheological property of fracturing fluid.

结合渗流力学和几何学，将人工隔层视为滤饼，在对人工隔层中渗流规律的研究中考虑了流体的非牛顿性和人工隔层的可压缩性，建立隔离层压降与厚度之间的关系式，探索人工隔层厚度与缝内压力、人工隔层可压缩性、上下隔层最小主应力、压裂液流变性等之间的关系。

By using shear -- lag method, the calculation of interlaminar stresses in composite laminate is transformed into calculating eigenvalues of a group of ordinary differential equations in this paper.

本文采用剪滞模型将复合材料层压板层间应力的计算转化为计算一组常微分方程的特征值问题。通过对不同铺层层压板层间应力的计算和比较表明：本文给出的方法简单，且行之有效

The damage represents complex mechanism. In this research based on T300/HT3 laminate structure, fatigue life is predicted phenomenologically, dealing mainly with in-plane stresses without accounting for out-of-plane failures such as craze. Fatigue modulus, based on damage mechanics, is used as a physical parameter which helps to describe the basic fatigue behaviors of unidirectional laminates and obtain expressions for cumulative damages defined by strains and stress. Based on some typical fatigue test data for unidirectional composite laminates, residual modulus sequence is found out.

本文以T300/HT3复合材料层压结构为研究对象，从唯象的观点出发，以损伤力学为基础构造损伤函数，考虑了剩余刚度和应变比率对复合材料的疲劳性能的影响，以这些变化着的机械性能作为损伤变量，建立了复合材料的疲劳损伤模型，基于层压板拉—拉疲劳试验数据，拟合出损伤模型中的参数，从而得到层压板拉—拉疲劳损伤变化规律，并建立损伤变量与内部损伤及疲劳寿命的联系，从而预测常幅应力作用下疲劳寿命。

The method according to claim 6, for manufacturing a blade wherein a part external to the shell comprises a blade rooting part having at least one attachment bar, in which an end portion for linkage to a hub of said rotor is fitted with a laminate attachment, also comprising thermoplastic composite, and extending said at least one spar bar housed in the shell, the method further comprising the step of producing the elementary piece comprising the at least one spar by producing each attachment bar and the spar bar in the form of a strip of continuous and unidirectional reinforcing fibres which are agglomerated by said thermoplastic matrix, obtained by pultrusion at a melting temperature of the matrix, of several plies of continuous and unidirectional fibres which are agglomerated by said matrix, and, if said rooting part comprises at least two attachment bars, each one of which respectively extends one spar bar, in superimposing parts of corresponding strips forming the spar part housed in the shell, with interposition of at least one ply of continuous and unidirectional fibres which are agglomerated by said matrix between the adjacent superimposed strip parts, and fitting a removable tool, in the shape of a wedge, between parts held spaced from each other of two neighbouring strips, to form two attachment bars of the rooting part, then arranging the strips in a mould, and inserting each linkage end portion of a pultruded strip between two laminate elements of the attachment, to superimpose all the laminate elements of the attachment, closing the mould and compacting its contents under pressure and at a melting temperature of said thermoplastic matrix, and solidifying the matrix by cooling to rigidify the spar thus obtained with the laminate attachment solidly attached to its rooting part.

该方法根据索赔六，制造业刀片其中的一部分，罐壳外部包括一个叶片生根的一部分，拥有至少一个实习酒吧，在其中一结束部分为联系枢纽的说，转子是带有附件的层压板，也包括热塑性复合材料，并延长说，至少有一石酒吧住在蚬壳公司，进一步组成的方法步骤，生产初级一块组成的至少有一个SPAR公司生产每个附件的酒吧和酒吧在SPAR公司的形式，带不断加强和单向纤维是由烧结说，热塑性矩阵，得到的拉挤在熔化温度矩阵，数层的连续和单向纤维是由烧结说，矩阵，如果说，生根部分组成，至少有两个实习酒吧，每个人都分别延长一石酒吧，在叠加部分，相应的带形成的SPAR公司的一部分，居住在蚬壳公司，与干预的至少有一单层连续和单向纤维是由烧结说，矩阵之间的毗邻叠加条形零件，及装修一个可移动的工具，在形状，离间，部分之间举行的间隔从对方的两个邻国带，形成两个附件酒吧的生根部分，然后安排带在一个模具，并插入每个联系年底部分一拉挤带之间的二板的要素扣押，叠加所有层压板的要素扣押，关闭模具和压缩其内容的压力下和在熔化温度说，热塑性矩阵，并巩固矩阵冷却 rigidify该SPAR公司，从而获得与层压板的附着牢固重视其生根的一部分。

A process for making an electronic device which comprises applying a nonaqueous plate-resistant ink by ink jet printing to selected areas of a dielectric substrate, optionally laminated with an electrically conductive metal, exposing the plate resistant ink to actinic and/or particle beam radiation to effect polymerisation, adding one or more metal layers by electrolytic or electroless deposition, the upper layer of which is an etchresistant metal, removing the polymerised plate-resistant ink with alkali and finally removing the electrically conductive metal which are optionally directly laminated to the dielectric substrate and not protected by an upper layer of etch-resistant metal by chemical etching wherein the plate-resistant ink is substantially solvent-free and comprises: A 30 to 90 parts acrylate functional monomers free from acid groups comprising mono- or higher functionality wherein 5 to 95% by weight are mono-functional monomers; B 1 to 30 parts acrylate functional monomer containing one or more acid groups; C 0 to 20 parts polymer or prepolymer; D 0 to 20 parts radical initiator; E 0 to 5 parts colorant; F 0 to 5 parts surfactant; and where the ink has a viscosity of not greater than 30 cPs at 40 DEG C and all parts are by weight.

一种制备电子装置的方法，所述方法包括以下步骤：通过喷墨印刷在任选层压了一种或多种导电金属的介电底材的选定区域涂覆非水的阻沉积油墨，将所述阻沉积油墨暴露在光化辐射和/或微粒束辐射中以完成聚合，通过电解沉积或无电沉积增加一层或多层金属层，其中最上层的金属层为一种或多种阻蚀刻金属，用碱除去聚合的阻沉积油墨，最后通过化学蚀刻将任选直接层压在所述介电底材上并且不被一种或多种阻蚀刻金属的上层保护的导电金属除去，其中所述阻沉积油墨基本不含溶剂，并且包含以下组分：A30-90份不含酸基团的丙烯酸酯功能性单体，所述单体包括单官能或多官能单体，其中5-95％重量为单官能单体；B1-30份包含一个或多个酸基团的丙烯酸酯功能性单体；C0-20份聚合物或预聚物；D0-20份自由基引发剂；E0-5份着色剂；和F0-5份表面活性剂；其中所述油墨的粘度在40℃下不高于30cPs，并且所有的份数以重量计。

与层压相关的网络解释 [注：此内容来源于网络，仅供参考]

composite laminate：复合层压板

双面覆铜箔层压板:double-sided copper-clad laminate | 复合层压板:composite laminate | 薄层压板:thin laminate

composite laminate：复合材料层压板

酚醛层压纸板:phenolic paper laminate | 复合材料层压板:composite laminate | 分层实体制造:laminate object manufacturing

laminate：层压

该技术通过嵌入成形可将衣料、皮革及木材等装饰材料与树脂形成一体. 该中心配备有XO技术用的层压(Laminate)生产设备. 目标是:建立可向整个亚洲供应层压产品的体制,向汽车厂商、机壳厂商及家电厂商普及XO技术.

laminate：层压材料

用针刺法制成的非织造布称为针刺呢(Needlepunched felt)191 层压材料(Laminate)层压材料是用泡沫,热塑性树脂或粘合剂粘合在一起的含有两层式更多层的材料.

thin laminate：薄层压板

复合层压板:composite laminate | 薄层压板:thin laminate | 金属芯覆铜箔层压板:metal core copper-clad laminate

laminated bearing：层压支承

层流 laminar flow | 层压支承 laminated bearing | 层压塑料板;防火胶板 laminated plastic decorative sheeting

laminated bearing：层压轴承,夹布胶木轴承

laminated beam 层积梁,叠层梁 | laminated bearing 层压轴承,夹布胶木轴承 | laminated belt 多层带

laminated safety glass：层压安全玻璃,叠层胶合安全玻璃

laminated plastics | 层压塑料 | laminated safety glass | 层压安全玻璃,叠层胶合安全玻璃 | laminated sheet glass | 夹层平板玻璃

interlaminar strength：层间强度(层压材料相邻层之间的黏合强度)

interlaminar core loss | 层间铁损 | interlaminar strength | 层间强度(层压材料相邻层之间的黏合强度) | interlaminar stress | 层间应力

laminating resin：层压树脂

laminating press 层压压榨 | laminating resin 层压树脂 | laminating wax 层压蜡