- 更多网络例句与压油润滑相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Model XGD level pigeonhole rare oil stand , lubricate device (including high, low-voltage two oil supply system) mainly applies to lubricate static-dynamic pressure film bearing of vertical grinder and the grinder itself.
XGD型高低压稀油站润滑装置（包括高，低压两个供油系统）主要适用于磨机静动压油膜轴承及其设备的润滑。
-
Oilless low pressure series air compressors Miniature oilless lubricated air compressors belong to reciprocating, piston, single action and air-cooled portable air compressors, they are designed for the departments which need pure air source and higher environmental requirements.
低压系列空压机全无油润滑空压机的用途和适应范围微型全无油润滑空气压缩机属往复、活塞、单作用、风冷移动式空压机，是为需要气源纯净和环境要求较高的部门而设计的。
-
Great progress has been made by taking the following technical improvement for the 2500 ton Hydropress: to replace thin oil with lithium grease in its lubricating system; to add four manual grease pumps; to lubricate the four griding parts of the movable beam and the six parts of the column plug sleeves.
通过对2500吨水压机润滑系统改稀油润滑为锂基润滑脂润滑，加装四台手动干油泵，对活动梁四个导向部位和主柱塞压套六个部位实施油膜润滑的技改实践，使1995年较1994年设备完好率提高1。
-
Type of guide Loading method Ball retainer Ball Cage LaCS is available Ball 4-way Equal Load Type Yes None None Plate cover / steel tape is available Dust cover type Seal Resistance Value Seal types for seal resistance value Dedicated cap for the LM rail mounting hole None None 3.90 UU C6 Applicable to QZ Lubricator Lubrication method Grease brand Nipple, plumbing fixture type Preload grade None Grease lubrication, oil...
导轨型号负荷方式防止滚珠脱落用保持器球保持器与LaCS配用滚珠 4方向等负荷型有无无可选用紧绷薄钢带/粘接薄钢带防尘罩形式密封垫片阻力值各种阻力值的密封垫片 LM轨道安装孔专用防尘盖无无 3.90 UU C6 可配用QZ润滑装置润滑方式润滑脂品牌螺纹接口、配管接头型式预压等级无脂润滑，油润滑，其它。。。
-
The paper summrized lubrication technology and the selection of lubricant for rotary kiln, grate cooler, mill, conveyor mechanical equipment and large scale fan as following,(1)in rotary kiln, apply oil spoon of circulatory lubrication or pump forced oil supply system in the roller supporting mechanism and use (superscript #)680 high load industrial gear oil, and use lubrication method of idle oil wheel or spray in drive gear wheel and select solid lubricant which has high viscosity, strong adsorbability, good abrasion resistance in utmost pressure and lattic crystal structure,(2) in grate cooler, use immersion oil lubrcation in reducer and boiled oil centralized lubrication method in supporting roller and guide roller bearing, choose (superscript #)1 limit pressure lithium lubrcant grease,(3) in mill, use circulatory lubrication with fluxing oil station in drive mechanism and circulatory lubrication with high-low pressure fluxing oil station in main bearing and sliding shoe bearing and select N320 industrial gear oil.
文章全面总结了回转窑、篦冷机、磨机、输送机械及大型风机的润滑技术和润滑剂的选择。其中，(1)回转窑的托轮支承装置一般采用油勺供油的连续循环润滑方式或油泵强制供油系统，润滑油选用680重负荷工业齿轮油；传动大小齿轮的润滑一般采用带油轮或喷雾的润滑方式，润滑剂宜选用粘度高、吸附性强、极压耐磨性好、具有点阵晶体结构的固体润滑剂；(2)篦冷机中传动减速机的润滑一般采用浸油飞溅润滑；托轮，挡轮轴承的润滑一般采用干油集中润滑的方式，润滑脂一般选用锥入度310~340的1极压锂基润滑脂；(3)磨机中传动装置一般采用稀油润滑站循环润滑和冷却的方式；主轴承或滑履轴承的润滑一般采用高低压稀油润滑站循环润滑和冷却的方式，润滑油一般选用N320工业齿轮油。
-
NF 99 is a heavy duty cutting oil for all general operations of non-ferrous metals including cuprous metals, aluminium and their alloys. NF 99 contains chlorinated additives, fatty oil and special lubricity fortifiers to impart quick release of chip from tool even under extreme high cutting pressure. The low viscosity ensures good cooling and flushing properties, which are essential for high speed machining.
NF 99是一款专为非铁金属而配制的切削油，适用於铜金属、铝金属及其合金的重负荷切削，含有氯化物、脂肪及特殊润滑添加剂，增进其极压及润滑性能，就算在高切削压力下，也能使屑片容易与刀具分离，低的黏度确保了足够的冷却及冲屑性能，都是高速切削所必需。
-
NF 99 contains chlorinated additives, fatty oil and sp ecial lubricity fortifiers to impart quick release of chip from tool even under extreme high cutting pressure.
NF 99 是一款专为非铁金属而配制的切削油，适用於铜金属、铝金属及其合金的重负荷切削，含有氯化物、脂肪及特殊润滑添加剂，增进其极压及润滑性能，就算在高切削压力下，也能使屑片容易与刀具分离，低的黏度确保了足够的冷却及冲屑性能，都是高速切削所必需。当使用在钢铁金属，此高性能油品同样能达到良好的效果。
-
Initially, assuming that the contact between cam and tappet is"dry contart", a dynamics model of Hertzin contact stiffness and impact damping is established. Next, with dynamic load on cam—tappet pair from the model, an analysis is made both to unsteady EHD oil film in cam—tappet pair under condition of full and partial lubrtication and to wear characteristics of cam profile. then, according to the fact that the lubrication in cam—tappet contact surface is EHD lubrication, taking the interaction between stiffness and damping of unsteady EHD oil film and rigidity of solid object contact into account, a dynamics equation of valve train relating to the dynamic effect of EHD oil film is built up and solved. Consequently, a further study is made on the dynamic characteristics of valve train under interaction of EHD oil film dynamic behavior and the problem of EHD lubrication in cam—tappet pair. Finally, the dynamic effect of full and partial EHD oil film is studied accordingly.
首先，通过对凸轮—挺杆接触为&干接触&的假设，建立了考虑赫兹&接触刚度&和冲击&阻尼&的配气机构动力学模型，用由此求得的凸轮—挺杆表面动载荷对凸轮—挺杆进行了全膜状态和部分膜状态非稳态弹流润滑分析，并研究了凸轮轮廓的磨损规律；然后，是在凸轮挺杆表面存在弹流动压油膜这一事实的基础上，相当于在动力学方程中考虑非稳态弹流油膜的&刚度&、&阻尼&和固体接触&刚度&的耦合作用，建立并求解了考虑弹流润滑行为动力学效应的配气机构的动力学方程，从而深入地研究了弹流润滑行为与动力学行为耦合作用下的配气机构动力学特征以及凸轮挺杆弹流润滑问题；作为前面工作的对应部分，考虑弹流油膜动力学效应的研究工作也同样分为全膜状态和部分膜状态进行。
-
"In the combination splash and pressure feed lubricating system, an oil pump takes oil from the oil pan and forces it through holes drilled in the engine Block and crankshaft."
在飞溅压力结合送油润滑系统中，油泵从油盘中把油抽上来并压入发动机机体上和曲轴上的油道
-
Corporation manages the oil quality type to include: The hydraulic fluid vehicles gear oil industry gear oil transformer oil/electric insulation oil motor oil refrigerator oil spindle oil circulation machine oil spark machine oil quenching oil engine bed guide rail oil heat conduction oil/heat transfer oil technical grade white oil put on make-up the level white oil formation processing oil stretch soap carburetion emulsified oil cutting compound/glossy to grease the turbine oil power oil air pressure machine oil cutting oil industrial gasoline to make articles out of plaited bamboo oil, diluent, petroleum and so on.
公司经营油品种类有：液压油车辆齿轮油工业齿轮油变压器油/电绝缘油发动机油冷冻机油锭子油循环机油火花机油淬火油机床导轨油导热油/传热油工业级白油化妆级白油成型加工油拉伸油皂化油乳化油切削液/油润滑脂汽轮机油传动油空压机油切削油工业汽油扎制油、稀释剂、煤油等等。
- 更多网络解释与压油润滑相关的网络解释 [注：此内容来源于网络，仅供参考]
-
ACM：丙烯酸酯橡胶
6) 丙烯酸酯橡胶(ACM)是饱和型主链结构的特种橡胶,具有优良的耐热、耐油、耐臭氧、抗紫外线等性能,特别适用于制作耐高温(00℃)热油、含硫及极压添加剂的润滑油类的橡胶制品(如油封、O型圈、垫片、胶管)和暴露于室外的变压器密封制品等.
-
sperm oil：鲸油
现在有些试验性的赛车用油采用某些植物油的成分. 通常用在齿轮的润滑上. 如抹香鲸油(Sperm oil)有非常良好的抗磨和抗压的特性. 它用於多数的有限度滑动的差速器.
-
Greases：润滑脂
H 46 润滑脂(GREASES) 高品质多用途工业用润滑油 (Beacon) 超级多用途轴承润滑脂/合成脂 (Unirex N/S) 聚脲基润滑脂 (Polyrex) 敞开式齿轮润滑脂 (Dynagear) 非皂类高温用润滑脂 (Norva) 多用途极压润滑脂 (Nebula EP) 高基础油粘度润滑脂 (Ronex Extra Duty) 食品加工器具润滑脂 (Carum 330) 具粘附性的防水润滑脂 (Cazar
-
force feed lubrication：压力润滑法
force feed 压油润滑 | force feed lubrication 压力润滑法 | force feed oiling 压力供油法
-
combination splash and pressure feed：飞溅与压力结合式送油(润滑)
extreme-pressure agent 极压剂 | combination splash and pressure feed 飞溅与压力结合式送油(润滑) | oil tray 油底壳
-
forcefeed：压油润滑
forcefactor 力因数 | forcefeed 压油润滑 | forcefeedback 力反馈