喷嘴

Based on the study and analysis of Y-shaped atomizers and their atomization mechanism, a new-type of fan-shaped spray atomizer is developed and experimentally studied.

在对Y型喷嘴结构和雾化机理研究分析的基础上，设计了一种新型的扇形雾化喷嘴，并对该喷嘴进行了实验研究。

Two types effervescent atomizers were tested in this work, Particle Dynamic Analyzer were used to measure and analyze the atomization performances and flow characteristics. A combustion chamber was devised to investigate the combustion characteristics of effervescent atomizers.

为此，本文作者设计了一套多孔气泡雾化喷嘴，在对其雾化特性研究的基础上，本文将着重对该喷嘴的燃烧特性进行实验研究，以得到相关的实验数据来指导和完善喷嘴的设计工作。

The data of atomizing mass flow, atomizing angle and atomizing droplet size of the pressure - swirl atomizer has been obtained by making an experiment on the pressure - swirl atomizers with different tangential orifice diameter and tangential orifice total area.

本文对小流量离心式喷嘴雾化特性及其影响因素进行了实验研究，着重研究了其他研究者很少涉及的切向孔总面积对离心式喷嘴雾化特性的影响，并对离心式喷嘴燃料分布特性进行了研究。

The spray characteristics of three configurations of effervescent atomizers are measured in detail by the MF laser-scattering-analyzer, showing the effects of airliquid ratio, available pressure drop, atomizer geometry and axial distance from exit of atomizer.

这些结果显示了气液比，气液供应压降、喷嘴几何参数、混合腔压力、喷嘴轴向距离等因素对气泡雾化喷嘴喷雾特性的影响。

Taking the flushing nozzle s of a demister commonly used in the wet flue-gas desulfurization techniques as the objects,the series of nozzles with different characteristics as angle of nozzle core and outlet chamfer radius were machined.

以湿法烟气脱硫工艺中常用的除雾器冲洗喷嘴为研究对象，加工了不同喷嘴芯旋度和排放口倒角半径的喷嘴。

Taking the flushing nozzles of a demister commonly used in the wet flue-gas desulfurization techniques as the objects,the series of nozzles with different characteristics as angle of nozzle core and outlet chamfer radius were machined.

以湿法烟气脱硫工艺中常用的除雾器冲洗喷嘴为研究对象，加工了不同喷嘴芯旋度和排放口倒角半径的喷嘴。

In order to obtain excellent gas jet from laser's nozzle, a combinatorial supersonic laser jet cutting nozzle is designed.

为了得到具有优良的射流流场激光喷嘴，设计了一种组合型超音速喷嘴，建立了该喷嘴计算流体动力学分析所需的控制方程。

For oil-fired boilers: oil-saving rate of 8 ~ 20%; to reduce emissions and sulfur emissions, removal of the nozzle coking coke 45 ~ 95%; improve fuel calorific value 5 ~ 6%; enhance firepower 5 ~ 25%; to reduce the value of spontaneous combustion about 14% and bring the nozzle to remove coke, will notnozzle coking and improved combustion stability, also catalyzed a number of harmful ingredients, can enhance product quality and yield, extend equipment life; can improve heat transfer efficiency and reduce labor intensity work to reduce harmful gas emissions and other benefits.

对于燃油锅炉：节油率为8～20％；降低废气及硫排放、清除喷嘴积炭结焦45～95％；燃油热值提高5～6％；提高火力5～25％；降低自燃值14％左右，并带来清除喷嘴积炭，不会因喷嘴结焦而停喷，提高了燃烧的稳定性，另外还催化了一些有害成分，可提高产品质量和成品率，延长设备使用寿命；可提高传热效率，降低工作劳动强度，减少有害气体的排放等效益。

Meanwhile the best air pressure combination is 0.1MPa, 0.2MPa, 0.1MPa. At this time, the hairiness-index of parallel ply yarn is the least, that means the hairiness has wrapped around parallel ply yarn well and the location of single yarns is fixed best in the ply yarn.

且当S向喷嘴气压为0.1MPa、对冲喷嘴气压为0.2MPa、Z向喷嘴气压为0.1MPa时，所纺制的平行股线毛羽指数最小，即单纱间毛羽纠缠包缠得最好，单纱位置固定性最好。

A fluid cartridge has a top wall to which the nozzle assembly may be secured, and a supply of pressurized air is connected to the nozzle assembly to draw fluid from the reservoir into the nozzle assembly through a siphon tube by a venturi action.

一流体储盒具有一顶壁，喷嘴组件可固定于该顶壁，一压缩空气供给源连接于喷嘴组件，用以通过一虹吸管利用文丘里作用将流体从贮存器吸入喷嘴组件。

I will endeavour to find you some assistance.

我尽力帮你找人帮忙。

At first I only know bruck is the idol of American younglings, afterwards I returned back to Taiwan ,even in Beijing last year ,I saw her poster everywhere, I was so surprised at her charm.

起初我只晓得布鲁克雷德丝是美国少男少女崇拜的偶像，后来回台湾，甚至去年在北京，居然也四处看见她的海报，才惊讶她的魅力之大。