查询词典 latent heat

Firstly, the mechanism of heat transfer enhancement by oscillation heat surface is discussed in natural convection scene. For different oscillation amplitude and Rayleigh number, the frequency that the heat transfer rate of oscillation heat surface is higher than non-oscillation condition is found and called critical oscillation frequency. The limitation enhancement of similar physical model is still researched by this study in mixed and forced convection scenes for different amplitude and Grashof number. Generally, that a heat surface subject to a oscillation motion is advantageous to convective heat transfer is a well-known tuition.

首先探讨在垂直管道内振动高温面於自然对流领域内提升高温面热传效率的机制，并且针对不同的振幅与雷利数求得加入振动条件后，高温面散热效果可以优於稳态非振动高温面散热效果的临界振动频率；进而探讨当垂直管道流进入混合对流与强制对流范围时，在不同的振幅与葛瑞秀夫数下，亦可发现加入振动条件后，振动高温面之散热效果可以优於稳态非振动高温面散热效果的临界振动频率。

The main products: Flat Flexible Transfer, Offset Transfer, trademark heat transfer, plant hair heat transfer, foam Tang Hua, Pearl Tang Hua, reflective heat transfer, sublimation heat transfer, heat transfer movement numbers, T-shirt heat transfer.

主要产品有：平面弹性烫画、柯式烫画、商标烫画、植毛烫画、发泡烫画、珠光烫画、反光烫画、升华烫画、运动号码烫画、 T-恤烫画。

In order to identify the proteins which are responsible for the better fruit set in heat-tolerant variety than in heat-sensitive one, we used two dimensional electrophoresis systems to separate isolated proteins from developing anther and looked for the proteins up-/down-regulated in heat-tolerant variety. In doing so, two selected cultivars, CL5915, the heat-tolerant, and L4783, the heat-sensitive, were grown at the same time in a phytotron at both 30/25℃ and 25/20℃. The proteins isolated from developing anthers of heat-tolerant variety grown in 30/25℃, were subtracted to remove the common genetic background.

因此为了鉴定出在高温逆境下与番茄著果率提升有关之蛋白质体，我们利用亚蔬中心所提供耐热番茄(Solanum lycopersicum， formerly Lycopersicon esculentum)品系CL5915与不耐热品系L4783，藉由控制二品系间生长温度之差异（热逆境30/25℃与一般生长环境25/20℃），在雄蕊发育早期利用蛋白质体学技术分析可溶性蛋白质，比较并扣除共有之遗传背景之蛋白质后，将二品系间具有差异的可溶性蛋白质筛选出来，并进一步利用LC-ESI MS/MS进行蛋白质身份鉴定。

Is one: the petrochemical, chemical, metallurgical, mechanical, electrical, pharmaceutical, light industry and the nuclear industry and other professional services industries, the production of material specifications, heat-resistant steel, resistance Steel mill heat-resistant alloy steel, rare earth wear-resistant steel, high-pressure high-temperature nickel chromium alloy steel: Steel Casting products, high temperatures centrifugal cast pipe casting, centrifugal cast pipe (casting thickness: 5 mm ---- 60mm, outside Drive: 50 mm ---- 1600mm, single-tube products such as super-6 m diameter size of the cast pipe products) tube, cracking furnace tube, and into the furnace, the furnace tube radiation, radiation control, the loser of the ash, the reaction of various Furnace roll, roll bottom, the furnace roll, sank roll, roll stability, and various types of precision casting fixture, heat-resistant steel castings, and Steel Plant for Hot Piercing Plug casting, casting industrial furnace, heat treatment furnace industrial castings , Heat-resistant castings, wear-resistant steel castings, various types of chemical process pumps, plastic alloy centrifugal pump fluoride, fluoride alloy pump, stainless steel pumps, valves, pipe, steel-lined composite of various pieces, all kinds of PTFE Plastic pipe, fin tube heat exchanger, paper, chemicals, light industrial and textile enterprises such as air-conditioning GL Ⅱ type, U-radiators, welding a variety of stainless steel, alloy steel, carbon steel, high-frequency finned tube , Studded tube, sawtooth-shaped fin, and other products of the manufacturing enterprises.

靖江市舒尔机械制造有限公司是一家为：石化、化工、冶金、机械、电力、制药、轻工和核工业等行业服务的专业公司，生产各种材质规格的，耐热钢、耐磨钢耐热合金钢、稀土耐磨合金钢、高温承压高镍铬合金钢：特钢铸造制品、耐高温离心铸管铸件，离心铸管（铸造壁厚：5mm----60mm、外径：50mm----1600mm，单管制品长6m等超大径的铸管制品尺寸）炉管、裂解炉管、转化炉管、辐射炉管、辐射管、输灰管、反应管、各种炉辊、炉底辊、炉内辊、沉没辊、稳定辊、及各类精密铸造工装夹具，耐热钢铸件，钢管厂用热轧穿孔顶头铸件、工业炉用铸件，热处理工业炉用铸件，耐热铸件，耐磨钢铸件，各类化工流程泵，氟塑料合金离心泵，氟合金泵，不锈钢泵、阀门、管件、各种钢衬复合管件，各类聚四氟乙烯塑料管件，翅片管换热器、造纸、化工、轻纺等企业的空调GLⅡ型，U型散热器、焊接各种规格的不锈钢、合金钢、碳钢等，高频翅片管、钉头管、锯齿形翅片管等产品的生产企业。

Apart from the working limitations resulting from its structural property, the flat plate heat pipe carries out heat dissipation through the evaporation and condensation of the working fluid. Thus, if the working angle of the fluid is adverse to its backflow, the heat pipe will fail easily. Furthermore, not the orientations of all the heat sources are favorable to the functioning of the heat pipe. To compensate for this drawback, this research focuses primarily on the development of a composite structure which will reduce the effect of gravity on the working fluid. Generally speaking, the heat pipe is divided into three main categories: the groove type, sintered metal type and mesh screen type, as shown in Table 2. As far as capillary force is concerned, the sintered metal type and mesh screen type show better performance. As mentioned in R.

平板式热管除了因其结构特性而产生的工作极限之外，由于其作用乃是透过工作流体的蒸发及凝结进行散热，故若是其工作角度不利于液体之回流，便容易使热管失效，且并非所有之发热源都是位于有利于热管工作之位置，因此本研究之主要目的为设计一可减少重力对工作流体影响之复合式结构；一般而言，热管之结构大致可分为沟槽、烧结及网格三种(如表2所示)，其中烧结及网格结构有较佳之毛细力，在 R。

Based on the experime ntal researches some of heat pipe apparatus are developed, such as, giant heat p ipe steam generator, high temperature heat pipe air furnace and separate-type heat pipe steam generator at high temperature and with high heat flux. All of t hese show the progress of heat pipe tec hnology research and development in recent years.

在试验研究的基础上，又相继开发了一系列热管设备，如高含尘气体下的大型热管蒸汽发生器、燃煤高温热管热风炉以及高温高热流密度下的分离式热管取热器，从而反映了近年来热管技术研究开发的一些进展情况。

Through analysis of the thermal equilibrium to the coke oven, it's determined that the sensible heat recoveries of the hot coke physical thermal energy, crude gas, and combustion waste gas are the main three aspect of the residual heat recovery in coke production. Among these, hot coke physical thermal energy is prime recovery resource with an approximate occupation of 35% of the total coke oven heat. On studying to the production processing of coke oven gas purification system, residual heat resource composite, energy system structure, and the state of the art of the recovery of the heat source, it's determined that the way of residual heat resource utilization is mainly to modify the chemical processing and the high temperature recovery processing medium, the energy system mainly adopts home-grown energy resource (coke oven gas. etc.) in stead of direct outsourcing.

通过对炼焦炉的热平衡分析，确定了炼焦生产余热资源的回收利用主要方向为回收红焦物理热、荒煤气和燃烧废气显热，其中，红焦显热占供入焦炉热量的35%左右，是主要研究对象；通过分析煤气净化系统生产工艺和余热资源构成，以及能源系统结构和工艺现状，确定了煤气净化系统余热资源利用途径以调整化工工艺、回收高温工艺介质余热为主，能源系统以采用自产能源替代直接外购能源为主。

XEIKON7000 is a magnetic powder business card printing and membership card making, it business card printing and membership card making into electrical impulses, as heads of the drum for replication on the magnetic latent image, a drum with a magnetic toner box, after the latent image by adsorption of ink on the wire on the ink on the charge, and then using electromagnetic will transfer to paper of ink on the image, and finally by UV and heat treated will be part of the graphics and text on a page-melting solid ink on the paper, and the magnetic drum demagnetization after cleaning and preparation for the next page of the business card printing and membership card.

XEIKON7000是磁性粉末制卡和会员卡制作，它将制卡和会员卡制作内容转换成电脉冲，经磁头复制在磁鼓上形成磁化潜影，磁鼓经过墨粉盒，磁化潜影吸附墨粉后由电极丝对墨粉充电，再利用电磁将墨粉影象转移到纸张，最后经紫外线和高温处理将页面上图文部分的墨粉熔固，而磁鼓经过清洁和退磁，准备下一页的制卡和会员卡制作。

A new dehumidification air conditioning was put forward on the research above. The procedures were as follows. Firstly, on the basis of thermocompression air conditioning, liquid dehumidification system was added. Secondly, dehumidification solution was sprayed on the evaporator and condensator directly. The evaporator's cooling was used in dehumidification. The condensator's heat was used in the solution's regeneration. The latent heat charge and sensible heat charge were treated at the same time in this air conditioning process.

通过对上述内容的研究，提出了一种新型除湿空调，在现有蒸气压缩空调系统基础上，加入液体除湿系统，将除湿溶液直接喷淋在蒸发器和冷凝器上，用蒸发器冷量实现带冷却除湿，用冷凝器热量对稀溶液进行再生，实现对空气调节过程中潜热负荷和显热负荷同时进行处理。

Based on the theory of heat and mass transfer for film type cooling, a mathematical model for the velocity distribution of a thin water film, the equations of mass and heat transfer, and evaporation cooling controlled by the latent heat transfer were established.

基于膜状冷却热、质传递机理，建立水膜薄层的速度分布，热、质传递方程和潜热蒸发冷却控制的数学模型。

Some of them were ligated to the plasmid vector pCR 2.1 andsequenced,respectively.

将所获DNA片段克隆到pCR2.1载体进行测序，并与基因组数据库进行同源性比较。

Thinking since Google owns Blogger, I would be able to escalate this issue to the support team.

自谷歌的思考拥有Blogger的，我将能够缓解这一问题的支持团队。