查询词典 height block

Now has casting, machining, finishing, flat-panel and other refinements of the workshop, the main products are cast iron flat-panel, flat line, the assembly of flat, square box, V-Rail, V-plane, parallel flat foot, the bridge-ping feet square, feet, machine-specific point of foot, bending plate, ladder Sizing Block, contour Sizing Block, migraine pendulum tester, gear beating device, machine tool inspection wand Adjustable Sizing Block Machine, Machine Tool Sizing Block shockproof, special wrench , explosion-proof tools, etc.; granite platform, flat feet, feet, square box, V-blocks, granite, table, Block, measuring instrument, such as granite.

现在有铸造、机加工、精加工、精研平板等车间，主要产品有铸铁平板、划线平板、装配平板、方箱、V型铁、V型架、平行平尺、桥型平尺、直角尺、方尺、机床专用角度尺、弯板、阶梯垫铁、等高垫铁、偏摆检查仪、齿轮跳动仪、机床检验棒、机床可调垫铁、机床防震垫铁、特种扳手、防爆工具等；花岗石平台、平尺、方尺、方箱、V型块、花岗石表座、花岗石测量仪等。

B: inner hole standard 54mm, outer diameter 127-160mm or so, various specifications of rolling screws, have modulus rolling rolling round the main motor shaft, fan shaft, worm and other products. C: Three-axis rolling wheels, the standard inner hole 25mm, 25.4mm, 35mm, 40mm, the main hollow tube rolling system, useful connections, art lamp, lighting tube teeth, elbows and so on. D: Automatic lathe accessories: cam, chucks, manual folder, Block, Block, steam-driven folder, sub-degree steam-driven clip seat, horizontal holder, manual horizontal sub-degree holder, a horizontal steam-driven sub-degree Block folder, sub-degree vertical folder manually Block, cylinder folder, CNC lathe tool, diamond grinding wheel, belts, metadata rods, measuring, activities Cam Block, feed rod, dental tube, Grinding, automatic lathes, table lathes, Rolling machine and so on...

产品采用进口钢材合金钢，高速钢专业材料，质量稳定精度高。A：二轴式台湾机型专用3T滚牙轮内孔标准50.5mm，外径90-100mm左右，台湾进口滚制各种规格之螺丝，还有各种直纹，网纹滚丝轮等。B：内孔标准54mm，外径127-160mm左右，滚制各种规格之螺丝，还有模数滚丝轮主要滚制电机轴，风扇轴，蜗杆等产品。C：三轴式滚丝轮，内孔标准25mm，25.4mm，35mm，40mm，主要滚制空心管件，管用接头，美术灯管，灯饰管牙，弯管等等。D：自动车床各种配件：凸轮，夹头，手动夹座，汽动夹座，分度汽动夹座，卧式夹座，手动卧式分度夹座，卧式分度汽动夹座，立式手动分度夹座，筒夹，CNC车刀，钻石砂轮，皮带，元棒，量具，活动凸轮座，送料杆，牙管，磨刀机，自动车床，桌上车床，滚牙机等等。。。

Ten alleles sequenced had the same modular structure, starting with a repeat block of Type 3 followed by a block of Type 1 before the central block of Type 3 (313) at 5'end, and starting with a repeat block of Type 4 followed by the central repeat block of Type 3 (43) at 3'end.

另一种为新发现的变异核心序列，暂命名为7型（type 7）。10个等位基因具有相同的模块结构，在5'端表现为：3型一1型--3型（313）排列，在3'端则表现为：4型一3型（43）排列。

Compared with D buffalo, the withers height, hip croop height, hucklebone width of ND buffalo respectively increase 5.5%, 7.4%, 9%, the withers height, hip croop height, hucklebone width of MD buffalo respectively increase

结果显示，杂交水牛尼本的鬐甲高、十字部高、坐骨节宽比德宏水牛分别提高5.5%、7.4%、9%，差异显著。杂交水牛摩本的鬐甲高、十字部高、坐骨节宽比德宏水牛提高5.9%、8.0%、11.9%，差异显著。

The results show that smaller height of reaction channel can shorten the time which reactants diffuse from channel to reaction surface, longer length of micro-channel can extend residence time of reactants on the catalyst surface, and consequently increase the methane conversion and hydrogen production. The pressure drop between inlet and outlet increases lineally with the increasing of length, while the height influences the pressure drop significantly when the height is less than 0.4 mm. Based on the overall consideration for the methane conversion and resistance characteristic generally, the suitable height of channel should be between 0.4 mm and 0.6 mm.

结果表明：较小的通道高度能够减小反应物在通道中的扩散时间，较长的反应通道长度能够增加反应物与催化剂的接触时间，甲烷转化率和产氢率提高；通道长度线性地影响微通道进出口压降的大小，而在通道高度小于0.4mm时，通道高度显著地影响进出口压降的大小；综合考虑微通道的重整性能和进出口压降等因素，通道高度在0.4~0.6mm之间较为合适。

According to the partial correlation coefficient between the growth of forest and leaf nutrient,the N、 K content in leaf of clone S2 affected the growth of breast-height diameter mostly,and influenced the growth of tree height were Mn 、 P 、 N、 Cu content.The K、 N、 P content in leaf of clone S8 affected the growth of breast-height diameter mostly,and influenced the growth of tree height were Ca、 N content.

4从林木生长与叶片营养的偏相关系数大小来看，影响无性系S2人工林胸径生长的主要是叶片中N、K元素含量，而影响树高生长的主要是叶片中Mn、P、N、Cu元素含量；在无性系S8人工林中，影响胸径生长的主要是叶片中K、N、P元素含量，影响树高生长的主要是叶片中Ca、N元素含量。

The submergible control platform width was positively related with the diameter of cage framework. The relation was k=1-2+22r-h_4~2+14l~2+12r~2-22rl, in formula h_4 was the platform height, which was restricted by the water depth. There h=h_1+h_2+h_3+2h_4+12H, in equation h_1 stood for net sheepshank height, h_2, the height of gravity setting on the bottom net, h_3, the distance from gravity setting to submarine, H was estimated maximal wave height while typhoon occurred in cage areas.

控制平台的宽度l与网箱主构架半径r正相关，设计时必须满足网箱框架外侧与平台的距离k大于零，其中：k=1-2+22r-h42+14l2+12r2-22rl，h4为控制平台高度，其受放置区水深h的制约，高度与水深的关系：h=h1+h2+h3+2h4+12H，h1为网衣缩结高度，h2为网衣底部重力装置高度，h3为重力装置到水底的距离，H为网箱放置区台风期预计最大波高。

With the increase of gas rate of tray holes the velocity of liquid phase on plate only increases a little between caps.The clear liquid height was measured by communicating pipe. The results indicate that the distribution of liquid height is different from traditional trays. The clear liquid height increases with the liquid flow and the height of weir, and decreases with the increase of the gas rate and then return. The gradient of liquid level of CTST is less than that of sieve plate.

应用连通法对立体传质塔板的板上清液层高度进行了系统的测量，结果表明：立体传质塔板的板上清液层高度的分布和传统塔板的分布不同；其板上液层高度随溢流强度和堰高的增大而增大，随板孔气速的增加先降低后又有所回升；与筛板相比较，CTST的板上液面梯度是较小的。

Heddewigii, Dianthus barbatus L, Dianthus latifolius, Dianthus caryophyllus and Dianthus chinensis var. liaotungensis, with relatively high fructification rates and certain traffic tolerance, showed little difference in ecological adaptability and exhibited an average seedling height of 20cm and a mean crown size of 23cm, and pruning during the late growth period could obviously promote flowering and reduce the seedling height by 3cm. While Dianthus barbatus L. and Dianthus phlox subulata, with relatively low fructification rates and higher traffic tolerance, had an unobvious difference in ecological adaptability, which present an average seedling height of 14cm and a mean crown size of 36cm, and pruning during the late growth period could promote flowering to some extent and reduce the seedling height by 2cm.

其中，大红石竹、锦团石竹、五彩石竹、五寸石竹、浓香石竹、重瓣石竹品种间差异小，平均苗高20cm，冠幅23cm，结实率相对高，有一定耐践踏能力，在生长后期进行修剪能很好的促进开花并降低株高3cm；常夏石竹和美国地被石竹品种间差异小，平均苗高14cm，冠幅36cm，结实率低，耐践踏能力稍强，在生长后期进行修剪能较好地促进开花并降低株高2cm。

In total, 7 QTLs of plant height, 6 QTLs of ear height, 18 pairs of digenic epistatic loci of plant height, 13 pairs of digenic epistatic loci of ear height were detected.

分析了各种遗传因素在株高和穗位高遗传基础中的相对作用大小，指出了加性、显性和上位性是玉米株高和穗位高的重要遗传基础。

Who? I never heard of him, Paul said, before asking teammate James Posey if he had heard of him.

赛后，科比说，他一直都是一名非常出色的射手，今天他打得很棒。

When I joined the company, I rotated around the different sections.

我加入这个公司时，轮换过几个不同的部门。