查询词典 graphite

With this method the copper plating graphite powder was made up in 50% copper content .The silver- copper plating graphite composite was prepared while the silver- copper-graphite composite and the silver-graphite composite were also made up together .The mechanical and electric characteristics of the three kinds of composites were tested and it was found that the copper plating graphite powder can only optimize the properties of the silver matrix composite under the high content of the graphite ,the conductivity and the mechanical property was improved and the material could take higher current in the same carbon content .At 20% carbon content, the resistivity of Ag-graphite composite was 1.67 times as high as that of silver- copper plating graphite composite, the resistivity of Ag-Cu-graphite composite was 3.23 times as high as that of silver- copper plating graphite composite. The bending strength of silver-copper plating graphite composite was 2.17 times as high as that of silver- copper-graphite composite, and the bending strength was 2.11 times as high as that of silver- copper-graphite composite. The wearability of silver- copper plating graphite composite was also enhanced greatly at high carbon content.

利用该方法制备了50%铜含量的镀铜石墨粉，然后进一步制备了一系列相同碳含量的银-石墨复合材料、银-铜-石墨复合材料、银-镀铜石墨复合材料，对三种材料的机械、电气性能进行了综合对比，发现在低碳含量时镀铜石墨粉不能改善复合材料的上述主要性能，而在中高碳含量时则能明显优化复合材料的整体性能，提高了复合材料的电导率，使复合材料在中高碳含量时既具有较高的耐磨性同时也能负载较大的电流，复合材料的机械性能也因镀铜石墨粉的加入而大幅提高，20%碳含量时，银-石墨复合材料的电阻率是银-镀铜石墨复合材料的1.67倍，银-铜-石墨复合材料的电阻率为银-镀铜石墨复合材料的3.23倍，银-镀铜石墨复合材料抗弯强度是银-铜-石墨复合材料的2.17倍，是银-石墨复合材料的2.11倍，同时，在实验给定的条件下，中高碳含量时银-镀铜石墨复合材料的机械磨损耐磨性和通电磨损耐磨性都得以显著提高，银-镀铜石墨复合材料在实验时的接触电压降也更为稳定。

Our company can provide various analytical aas graphite furnace, various graphite cone, graphite tube, graphite platform, graphite crucible for gas analysis, graphite gleithretter, graphite sinter pole, heterotype graphite mould, graphite crystallizer, oil free bearing, thermocouple graphite protecting jacket, graphite obturating ring.

我公司可以向国内外用户提供各种分析仪器原子吸收石墨炉，各种型号石墨锥、石墨管、石墨平台；各型号气体分析仪器石墨坩埚、各尺寸石墨滑片、石墨烧结棒、异型石墨模具、石墨结晶器、无油石墨轴承、各型号热电耦石墨保护套、石墨密封圈。也可以来图带料加工。

Our company can provide various analytical AAS graphite furnace, various graphite cone, graphite tube, graphite platform, graphite crucible for gas analysis, graphite gleithretter, graphite sinter pole, heterotype graphite mould, graphite crystallizer, oil free bearing, thermocouple graphite protecting jacket, graphite obturating ring.

我公司可以向国内外用户提供各种分析仪器原子吸收石墨炉，各种型号石墨锥、石墨管、石墨平台；各型号气体分析仪器石墨坩埚、各尺寸石墨滑片、石墨烧结棒、异型石墨模具、石墨结晶器、无油石墨轴承、各型号热电耦石墨保护套、石墨密封圈。

Products: graphite ring, graphite seal ring, graphite seals, graphite bearings, graphite crucible, graphite spherical ring, cylindrical graphite, graphite blades, flexible graphite, graphite ring rotary joint, sliding, bearing, friction block, piston rings, orientation ring, such as carbon plate.

产品：石墨密封圈，石墨密封环，石墨密封件，石墨轴承，石墨坩埚，石墨球面环，石墨圆柱，石墨叶片，柔性石墨，旋转接头石墨环，滑片，轴瓦，磨擦块，活塞环，导向环，碳板等。

The device comprises an arc discharge vacuum chamber; wherein, the arc discharge vacuum chamber is connected with a vacuum pump and is internally provided with a graphite cathode and a graphite anode which are connected with a DC supply. The device is characterized in that the graphite cathode and the graphite anode are respectively provided with an upper spherical crown shape graphite plate and a lower spherical crown shape graphite plate which are matched with each other and formed a spherical crown shape capacitor.

它包括电弧放电真空室，电弧放电真空室与真空泵相连接，电弧放电真空室内设有石墨阴极和石墨阳极，石墨阴极和石墨阳极与直流电源相连接，其特征在于在石墨阴极和石墨阳极上分别设相配合的上球冠形石墨板和下球冠形石墨板，上球冠形石墨板和下球冠形石墨板形成球冠型电容器。

Company produces the "Tianfu card" graphite crucible, from 0.5 #-2000 #, model specifications, and supporting the production of graphite core reverberatory furnace crucible, graphite ring, graphite plate, and in accordance with the requirements of users profiled the production of graphite products .

公司生产的"天府牌"石墨坩埚，从0.5#-2000#，型号规格齐全，并配套生产石墨坩埚反射炉芯，石墨环，石墨盖板，并可根据用户的要求生产石墨异型制品。

Our company is an emerging Carbon Co., Ltd., mainly engaged in all kinds of graphite fixed ring, graphite stationary ring, graphite sleeve, thrust plate, graphite bearing, graphite bearing covers.

我公司是一家新兴的电碳有限公司，主要经营各种石墨动环，石墨静环，石墨套，推力板，石墨轴承，石墨轴承套等。

Company produces the "Tianfu card" graphite crucible, from 0.5 #-2000 #, model specifications, and supporting the production of graphite core reverberatory furnace crucible, graphite ring, graphite plate, and in accordance with the requirements of users profiled the production of graphite products .

公司生产的&天府牌&石墨坩埚，从0.5#-2000#，型号规格齐全，并配套生产石墨坩埚反射炉芯，石墨环，石墨盖板，并可根据用户的要求生产石墨异型制品。

Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.08-0.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.02-0.05 and 0.2 mm^3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.

结果表明：PAN炭纤维改善C/C复合材料的摩擦磨损行为；在实验载荷范围内，与高强度石墨材料相比，含RL炭C/C复合材料的摩擦因数降低0.08~0.12；体积磨损量增幅降低；与热解炭试样相比，具有SL炭C/C复合材料的摩擦因数降低0.02~0.05，体积磨损量低0.2立方公厘左右；随着时间的延长，大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降，而石墨、热解炭块的摩擦因数均呈不同幅度的上升；具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低，具有SL炭的C/C复合材料摩擦表面较粗糙；高强石墨能形成较完整致密的摩擦膜，但磨粒磨损严重，磨屑易在摩擦膜边缘形成层状堆积；热解炭块摩擦表面磨屑堆积松散，有较多的孔洞以及热解炭层整体剥落的形貌。

Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.080.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.020.05 and 0.2 mm3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.

结果表明：PAN炭纤维改善C/C复合材料的摩擦磨损行为；在实验载荷范围内，与高强度石墨材料相比，含RL炭C/C复合材料的摩擦因数降低0.08~0.12；体积磨损量增幅降低；与热解炭试样相比，具有SL炭C/C复合材料的摩擦因数降低0.02~0.05，体积磨损量低0.2 mm3左右；随着时间的延长，大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降，而石墨、热解炭块的摩擦因数均呈不同幅度的上升；具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低，具有SL炭的C/C复合材料摩擦表面较粗糙；高强石墨能形成较完整致密的摩擦膜，但磨粒磨损严重，磨屑易在摩擦膜边缘形成层状堆积；热解炭块摩擦表面磨屑堆积松散，有较多的孔洞以及热解炭层整体剥落的形貌。

Fostering the concept of multi-culture firmly and mastering the development of advanced culture correctly are conductive to resisting terrorism, separatism of nationalities and ultraism of religion, which is of great academic theoretical, immediate and profound historical si...

牢固树立多元文化的理念和正确把握先进文化的发展方向，有助于在世界范围内自觉地抵制恐怖主义，民族分裂主义和宗教极端主义。不仅具有重大的学术理论意义，而且也具有重大的现实意义和深远的历史意义。

But if anyone walks in the night, he stumbles, because the light is not in him.

11：10 若在黑夜行走，就必碰跌，因为那光不在他里面。