查询词典 foam

In combination with these experimental phenomena and theoretical analysis, the foam corrosion inhibition mechanisms in foam drilling are first put forward in the paper. They include: the adsorption of foaming agent on steel surface; the complex of foam-stabilized viscosifier with the multivalence metallic ions in formation water; isolating the steel from oxygen by foam; and fixing sands and reducing washout by foam.

结合实验现象和理论分析，首次总结提出泡沫钻井中泡沫的缓蚀机理，泡沫的缓蚀性主要在于：发泡剂在钢铁表面的吸附；稳泡增粘剂能与地层水中的多价金属离子络合；泡沫对氧的隔绝；泡沫能固定砂粒，减少冲蚀。

Compare with the ability of eliminate the foam, Throught the test to discover, the taper of the diffuse pipeline of the eliminating-foam equipment can not small, the taper of the diffuse pipeline greater than 79/350; The length of the diffuse pipeline of the eliminating-foam equipment greater than 350mm; Whether the speed of the foam can too high, the velocity of the foam 0.3～0.6m/s; The width of lacune is between 0.2 and 0.5mm.

由于泡沫的流变性难以控制和测试，其变化较大，提出以利用所有泡沫钻探生产的钻进压力值，利用数学分析的方法对这些钻进压力值进行分析，在此基础上总结出更加合适、简捷的泡沫灌注压力公式。

YTS compound is mainly used to warm foaming agent concrete foam insulation, foam concrete insulation, thermal insulation layer of the production, it could cement, magnesia, lime, gypsum, powder, sawdust, fly ash, sand, Pak Nai paper sludge and other raw materials, foam, made of foam concrete, wall board, lath, block, hollow brick, heat pipe protection kits, roof insulation foam board and other lightweight building materials, also can be used for the production of roofing insulation layer.

HTD-1型复合发泡剂主要应用于地暖泡沫混凝土绝热层、泡沫混凝土隔音、保温垫层的生产，其可对水泥、氧化镁、石灰、石膏、石粉、锯末、粉煤灰、沙、造纸废渣白泥等多种原材料发泡，制成泡沫混凝土、隔墙板、板条、砌块、空心砖、实心砖、热力管道保护套、屋顶隔热板等多种轻质泡沫建材，也可用于屋面保温隔热层制作。

I decided to use urethane foam. I used 1" and 2" thick slabs of this foam, built up to fit the cover recess area and hot-melt glued together. I built up "shelves" as the plans recommended to support the foam, and then sanded the outside of the foam to match the shape of the fuselage bottom and the NACA air scoop.

我决定使用聚氨酯泡沫，我用1 "和2 "厚砖，这泡沫，建立起以适应封面休会面积和热熔粘在一起，我建立起来的"货架"作为计划的建议，支持泡沫，然后用砂纸外面的泡沫，以配合形状的机身底部和naca空气勺子。

Simple to operate, and easily adjustable for foam consistency, the Liberty 20 Gallon Foamer can provide the user with a range of foams, from wet, clinging foam to dry, shaving cream foam; the user can decide what type of foam is required.

操作简单，方便地为泡沫的一致性可调，自由20加仑发泡剂可以提供一系列的泡沫用户从潮湿，执着泡沫干燥，剃须膏泡沫，用户可以决定什么类型的泡沫需要。

The influence of high temperature and high pressure on foaming agent's properties in opened and closed system, and influence of the change of foaming agent's properties on foaming capacity and foam stabilizing capacity are also studied. The multiple regression theory is used to establish the quantitative characteristic functions of foaming agent versus temperature and pressure. Based on the Gibbs Principle, the quantitative characterization is carried out on relation of foam system's free energy versus its surface tension, surface area and concentration, and the analysis of energy concluded that the disintegration of the foam is inconvertible. At the same time, the influence of change of foam's shape and structure on distribution of reservoir temperature and pressure is qualitatively described, and the coupling mechanism between temperature field, pressure field and chemical field is systematically expounded.

同时，研究了不封闭体系、封闭体系下高温、高压对发泡剂性质的影响，以及发泡剂性质的改变对其发泡性能、稳泡性能的影响；采用泡沫实验的相关结果，运用多元回归理论，建立温度、压力与发泡剂浓度的定量表征函数；基于Gibbs原理，对高温、高压下泡沫体系的自由能与其表面张力、体系中液体的表面积以及浓度关系进行定量化的表征研究，从能量的角度得出了泡沫衰变过程具有不可逆性；同时定性地描述了泡沫形态、结构的变化对油藏温度和压力分布的影响，系统地阐述了温度场、压力场、化学场间的耦合作用机理。

FLOUR – PROTEIN FOAM : Protein Based with surface active protein SP GR AT (20)= 1.18 + 20 C VISCOSITY =(15) CST (+20 C) ADMIXING RATE = 3 % FOAM EXPAMNTIONRAT =(6-8) TIME 25% DRAINAGE TIME =(7-8) M ph = 7+ 0.5 CONTAINER =(200L)STEEL DRUM WITH PLASTIC LINING 50 LTRS SAMPLE FOR TEST REQUIRED 3:portable foam pump for filling foam fighting truck

面粉– 蛋白泡沫：表面活性蛋白基 SP GR AT (20)= 1.18 + 20 C 粘性=(15) CST (+20 C)混合率= 3 %起泡=(6-8) TIME 25%排水时间=(7-8) M ph值= 7+ 0.5 容器=(200L)钢芯塑线需要 50 LTRS 测试样本 3：轻型泡沫泵为卡车碰撞填充泡沫

These years we combine with bakelite bubble equitment—The — an aluminum PF foam reunites the breeze tube plank production line, PF foam line incises the machine, PF foam a whet the even machine, PF foam the hair bubble machine etc. the above equipments to have succeeded the devotion produces,Is on steam!all index achieve international level.we produce one million sq meters!

近年来结合国内酚醛业的发展需要和国内的实际情况，研制生产出了一系列的新型酚醛泡沫生产设备——双面铝箔酚醛泡沫复合风管板生产线、酚醛泡沫线切割机、酚醛泡沫双面磨平机、酚醛泡沫发泡机等以上设备已成功投入生产，各项指标达到国际先进水平，年产酚醛泡沫夹心板一百万平方米。

In addition, said foam sealed cycle system comprises: foam bits removing system, foam pressurizing system, and foam detecting system.

本发明所涉及的泡沫密闭循环系统由：泡沫除屑系统、泡沫增压系统、泡沫监控系统三部分组成。

Bubble nucleating and porosity were improved by adding lignin granule, and cell size of the polyurethane foam was decreased. Not only physical property but also thermal property of the material were enhanced. Compared with soft polyurethane foam, tensile strength of lignin reticulated polyurethane foam was raised by 140% at most which lignin content was 5%, and the heat-degradation temperature at the first stage was 50℃ more than soft polyurethane foam which lignin content was 10%. There had been a great improvement in heat resistance of the material. It was showed that weight of biological film reached to 10000 mg/L and 12100 mg/L when the lignin content of the polyurethane foams was 5% and 8% respectively via 30-day biofilm formation testing.

实验结果表明：1，4-二氧六环对木质素的溶解能力是最好的，可使木质素均匀分散在聚氨酯泡沫塑料中；木质素颗粒的加入可改善发泡过程的成核作用，提高聚氨酯泡沫的开孔率，降低泡沫孔径，并且能提高材料的力学、热学性能，与软质聚氨酯泡沫塑料相比，木质素含量5%的聚氨酯泡沫塑料拉伸强度最大可提高140%，木质素含量10%的聚氨酯泡沫塑料发生第一阶段失重的温度提高了50多度，材料的热稳定性大大提高；经过30 天的挂膜测试，木质素含量5%和8%的聚氨酯泡沫塑料的挂模量可分别达到10000 mg/L和12100 mg/L。

The second is to cut a mere 100 calories from your diet , which is the equivalent of a tablespoon of butter.

第二个就是从你的饮食中减少一百卡路里，只是相当于一大汤匙的黄油。

This is where the Rorschach test comes in.

现在，罗氏测试就出现了。