查询词典 circular column

On the basis of formal chapters' analysis, learning from foreign countries' successful experience in circular economy's legislation, considering our own legislation practice in developing circular economy, the main framework of our country's circular economy's legal institutions' construction is put forward as follows, the guidance thought of the circular economy's legal institutions' construction is the concept of scientific development and the thought of sustainable development; the 3R principle, the principle of following the ecological rules, the principle of giving priority to precautions, the principle of the contaminator paying are the basic principles of the circular economy's legal institutions' construction; the field of the natural resources' exploitation and utilization, the field of manufacturing industry and service trades, the field of disposing waste and changing waste into resources, the field of the exploiting and utilizing energy, and the field of social consumption are the key fields of the circular economy's legal institution's construction; the circular economy's legal system is constructed from four levels, the basic laws, the principle laws, the comprehensive laws and the special laws; The following circular economy's legal institutions are made, the institution of circular economy's planning, the institution of green economy's accounting, the institution of scientific and technological information's titles, the institution of economic encouragement, the institution of market allowance, the institution of listing the names' who set good example in developing circular economy, the institution of forcing those enterprises with heavy pollution into developing circular economy, the institution of green consumption, the institution of the public's participation, the institution of sharing the responsibility, and the institution of evaluating the circular economy's results.

该部分以前面几章分析的循环经济立法理念为基础，借鉴国外循环经济立法的成功经验，结合我国的循环经济立法实际，提出了我国循环经济法制建设的基本框架是：以科学发展观和可持续发展思想为循环经济法制建设的指导思想；以"3R"原则、遵循生态规律原则、预防优先原则和污染者付费原则为循环经济法制建设的基本原则；以自然资源开发利用领域、加工制造产业与服务产业领域、废弃物处理与资源化领域、能源开发利用领域和社会消费领域为循环经济法制建设的重点领域；从根本法层面、基本法层面、综合法层面和专门法层面来构建循环经济法律体系；构建包括循环经济规划制度、绿色经济核算制度、科技信息支持制度、经济激励制度、市场准入制度、循环名录与循环示范制度、重点污染企业强制实施循环经济制度、绿色消费制度、公众参与制度、责任分担制度和循环经济绩效评价制度在内的循环经济法律制度。

Among them flowers and plants of head shape column (flowers and plants of column of Capitata), horse segment of a circle (flowers and plants of column of Fine Stem), Mineirao and CIAT1517 column flowers and plants (CIAT1517) belongs to phosphor small effect is not sensitive model; heat grinds 2 column flowers and plants (Reyan2), heat grinds 5 column flowers and plants (Reyan5), flowers and plants of column having a check mark (flowers and plants of column of Verano), bush and TPRC2001-2 column flowers and plants (TPRC2001-2) performance is not steady.

其中头状柱花草、马弓形柱花草、Mineirao柱花草和CIAT1517柱花草(CIAT1517)属于磷低效不敏感型；热研2号柱花草(Reyan2)、热研5号柱花草(Reyan5)、GC1581柱花草(GC1581)和TPRC2001-1柱花草(TPRC2001-1)属于磷高效敏感型；西卡柱花草属于磷高效不敏感型，有钩柱花草、灌木柱花草和TPRC2001-2柱花草(TPRC2001-2)表现不稳定。

The main research contents are as follows:1. Through massive calculation, analysis and comparison, sum up the similarities and differences between the special-shaped cross sections and rectangular cross sections in mechanical features, between reinforced concrete special-shaped columns and rectangular columns in load-bearing capacity, ductility performance and provide necessary basic concepts and data for further understanding the characteristics of the special-shaped columns;2. Through massive elastic calculations and elasto-plastic analysis, under the preconditions of satisfying the code's requirements for axial compression ratio, limit value of lateral displacement and load-bearing capacity of normal section,oblique section and beam-column joint, under circumstances of different intensity of earthquake, structure dead weight, sort of site and column grid bay dimension, the variation regularity of maximum suitable height of structure, and thus sum up the maximum suitable height of structure for code for the purpose of macro-control while deciding the design scheme;3. Make a preliminary study on the stress feature of reinforced concrete special-shaped column and Z-shaped column of which the ratio of limb length to limb thickness is between 4~5 ,and the preliminary design method is suggested;4. Through elato-plastic time history dynamic analysis of typical projects, check up the weak storey of the special-shaped column structure and yielding, breaking and collapse mechanism to satisfy the earthquake resistant requirement to buildings of remaining stand under strong earthquake;5. Derive for project use simplified calculation formula of vibration period, suitable vibration period, suitable rigidity of special-shaped column structure through theoretical analysis, and provide an easy and practical method for deciding the structure scheme economically, safely and reasonably;6. Based on the study achievements in theory and massive analysis and calculations of this paper, sum up the regularities of inner force, deformation of special-shaped column structure and seismic conceptual design, and thus the suggection of seismic design of special-shaped column structures is presented.

本文研究的主要内容如下：通过大量的计算、分析和对比，总结出异形截面与矩形截面在力学特性、钢筋混凝土异形截面柱与矩形截面柱在承载能力、延性性能等方面的异同，为深入了解异形截面柱的特点提供必要的基本概念和数据；通过大量的弹性及弹塑性计算分析，在满足规程对轴压比、侧移限值及正截面、斜截面、节点承载力抗震验算要求的前提下，在不同抗震设防烈度、结构自重、场地类别及柱网开间尺寸情况下最大适宜高度的变化规律，并在此基础上总结归纳出异形柱结构的最大适用高度规定，可用于规程，以便于在确定方案时起到宏观控制的作用；对肢长与肢厚比在4～5的钢筋混凝土异形截面柱及Z形柱的受力特点进行初步探讨，提出初步的设计方法；通过对典型工程的弹塑性动力时程分析，检验异形柱结构的薄弱层及屈服、破坏、倒塌机制，以达到建筑物大震不倒的抗震设防要求；通过理论分析，推导出异形柱结构自振周期，以及适宜自振周期、适宜刚度的工程实用简化计算公式，为经济、安全、合理地确定结构方案提供简便实用的方法；在本文理论分析、计算以及大量的研究成果基础上，总结归纳出异形柱结构内力、变形的规律及抗震概念设计内容，并在此基础上提出异形柱结构的抗震设计建议。

Finally it analyzes the feasibility that using hydromechanics to analyze traffic flow by contrasting various characters between traffic flow and fluid flow. It analyzes influence of road alignment to basic expressway segment capacity by hydromechanics, and obtains viscous resistance and viscous movement differential equation when the vehicle drives on circular curve segment of expressway. And it infers that viscous resistance is correlated with sideway force coefficient, slope of crown and radius of circular curve. Radius of circular curve, sideway force coefficient and slope of crown are bigger, viscous resistance is smaller, the influence to capacity is smaller when the vehicle is running on nearside lane of circular curve; but radius of circular curve and sideway force coefficient are bigger, slope of crown is smaller, viscous resistance is smaller, the influence to capacity is smaller when the vehicle is running on fast lane of circular curve.

最后通过对比交通流与流体流的相似性，运用流体力学分析了道路线形对快速路基本路段通行能力的影响，求出了车辆在曲线路段的粘性阻力，建立了车辆在曲线路段的粘性运动微分方程，并由此推知，粘性阻力与横向力系数、路拱横坡度和圆曲线半径都有关系，当车辆在圆曲线外侧车道上行驶时，圆曲线半径、横向力系数和路拱横坡度越大，粘性阻力就越小，对道路的通行能力影响就越小；而当车辆在圆曲线内侧车道上行驶时，圆曲线半径和横向力系数越大，路拱横坡度越小，粘性阻力就越小，对道路的通行能力影响就越小。

In this dissertation, first, based on theory of cutting tooth about the gleason spiral bevel gear, the equation of meshing in the process of cutting tooth, the surface equation of generating gear as well as the general tooth surface equation of the double circular arc spiral bevel gear, using GB12759-1991 type of double circular arc gear as a basic gear profile, a three-dimension solid model of double circular arc spiral bevel gear which has the good adaptability was carried out by used of Unigraphics software;Second, by researching of the algorithm about contact and collision as well as various contact types based upon Contacting Finite Element Method, a foundation was laid for selecting the contact type in analyzing contact stress of double circular arc spiral bevel gearing;Finally, through the connection port of PARASOLID between UG software and ANSYS/LS-DYNA software, the three-dimension solid model of double circular arc spiral bevel gearing obtained above in UG was imported into ANSYS/LS-DYNA, a finite element analyzing about contact stress of double circular arc spiral bevel gearing was carried out by applying new loading method.

本文首先基于格利森弧齿锥齿轮加工原理及切齿啮合过程中的啮合方程、产形轮齿面方程以及双圆弧弧齿锥齿轮的齿面方程，选用GB12759-1991型双圆弧齿轮基本齿廓为基准齿形，利用Unigraphics软件的建模功能，绘制了有较好适应性的双圆弧弧齿锥齿轮传动三维实体模型。其次，描述了应用有限单元法进行实体接触与碰撞问题算法的公式，研究了有限元分析中的各种接触类型以及双圆弧弧齿锥齿轮接触应力分析中所选择接触类型的依据。最后，通过UG软件和ANSYS/LS-DYNA之间的PARASOLID接口工具包，将UG软件中得到的啮合齿轮模型导入ANSYS/LS-DYNA有限元分析软件，给出一种新的加载方法，进行了双圆弧弧齿锥齿轮传动的接触应力的有限元分析。

The conclusions were as follows: theνO-H andνC=O IR absorption maxima shifted towards higher wave numbers after imprinting 17β-estradiol on TFMAA-co-TRIM copolymer with the red shift of theνO-H groups being apparent after precipitation polymerization for 16h while that forνC=O groups being observed after polymerization for 24h. A strong interaction between TFMAA and 17β-estradiol was confirmed by the high selectivity for 17β-estradiol, as indicted by the values of the separation factor of isomers of 17β-estradiol/17α-estradiol (2.28) and the imprinted factor (3.01). Particle diameter of TFMAA-co-TRIM polymer was between 300 nm and 1.5μm, which suited well for solid phase sorbent throughout at low column pressure. The recognition of imprinting TFMAA-co-TRIM polymer for sterol molecules was driven by enthalpy eluted with acetronitile, and low temperature was in favor of the separation of sterol structure analogues on imprinting column. TFMAA-co-TRIM polymer possessed of determinate anti-heat stability, with melting point beginning at 255.84℃, Tp=257.40℃, control TFMAA-co-TRIM polymer and imprinting TFMAA-co-TRIM polymer were respectively decompounded at 267.79℃and 343.11℃, and solid micro-extraction noddle prepared by the special polymerization also showed definite recognition for 17β-estradiol by GC/MS detecting at 270℃. By selection of various washing and elution solvents, elution reagents of close polymerization system were of more advantage in template molecules retention and recognition on molecularly imprinted solid phase extraction column. At a certain extent, progesterone, 17α-estradiol, 17β-estradiol and 4-androstene-3, 17-dione could be intercepted on the MISPE column. Especially, MISPE had high selectivity for progesterone, and imprinting TFMAA-co-TRIM polymer could achieve adsorption balance within 50 min by absorption kinetics test for 17β-estradiol. However, MISPE column showed better selectivity and enrichment property for 17β-estradiol than C18 and CSPE columns according to the data from HPLC and GC/MS analyses. Recovery of 17β-estradiol on MISPE column was up to 85.5% while when prime extracting solution of milk powder was sampled, the recovery of CSPE and C18 columns were 43.7% and 30.7%, respectively.

通过研究阐明：紫外聚合产物TFMAA-co-TRIM中的νO-H振动吸收峰在聚合16h后红移，νC=O振动吸收峰在聚合24h后红移；TFMAA-co-TRIM对雌二醇异构体的印迹因子达到了3.01，α为2.28，优于其它功能单体参与得到的聚合物识别特性；TFMAA-co-TRIM聚合物粒径介于300 nm至1.5μm之间，作为色谱固定相具有良好的通量和低的柱压；在乙腈流动相中，TFMAA-co-TRIM分子印迹固定相的分离过程主要被焓驱动，低温有利于分子印迹固定相分离甾醇结构类似物；TFMAA-co-TRIM分子印迹聚合物在255.84℃时开始熔融，Tp=257.40℃，聚合物CP的降解温度在267.79℃，MIP降解温度在343.11℃，制备的固相微萃取头初步经GC/MS 270℃的耐热性测定；不同的洗提溶剂筛选证明了选择接近聚合溶剂的洗脱体系更有利于MISPE发挥识别效应；分子印迹固相萃取柱对孕酮、17α-雌二醇、17β-雌二醇和雄烯二酮都具有不同程度的保留特性，可作为此类化合物的吸附材料，特别对孕酮强保留的富集特性，可作为孕酮的选择性识别吸附剂，其分子印迹聚合物对17β-雌二醇的吸附动力学测定显示在50 min内基本达到吸附平衡，具有作为传感器核心敏感材料的潜力；对比萃取奶粉中17β-雌二醇性能，MISPE柱比非分子印迹固相萃取柱和C18柱具有更高的保留，回收率依次为85.5%，43.7%和30.7%。

The load transfer and settlement behavior from the simulation results are also analyzed: most of the column load concentrates on the enlarged column cap, and distributes quickly, there is more load attenuation at the variable section. The skin friction of enlarged column cap develops more adequately than underside column. The column settlement concentrates on enlarged column cap, and soil settlement concentrates on a little area below the variable section.

利用三维数值模拟分析了钉形搅拌桩复合地基的荷载传递和变形特性：钉形搅拌桩桩身荷载主要集中在扩大头部分，且衰减较快，变截面处桩身轴力有较大衰减，扩大头桩侧摩阻力较大，下部桩体侧摩阻力较小；桩身变形集中在扩大头，桩间土变形则集中在变截面以下较短范围内。

This article first antenna, microstrip theory, the circular polarization technology, the theoretical discussion, in this based on the microstrip antenna of circular polarization method - corner square microstrip antenna, and has done a design simulation , and then do the design and further research to improve and eventually get a resonant frequency (S11 reflection coefficient corresponding to the minimum frequency) for the 1.5GHz and 1.43GHz, the frequency of circular polarization for the 1.46GHz, S11 is less than -10dB relative bandwidth, the VSWR is less than 2 is about 8.8% relative bandwidth, axial ratio less than 3dB relative bandwidth of about 2.2% of the right circular polarization microstrip antenna design case, which proved very good the circular polarization microstrip antenna theory, also fully confirmed by a square corner design is a practical program, and select the appropriate regulation of sticks is indeed able to improve the performance of the antenna.

本文先对天线、微带理论、圆极化技术等进行了理论论述，在此基础上，提出圆极化微带天线的实现方法——切角方形微带天线，并对此做了设计仿真，后又对这一设计方案做了改进及进一步研究，最终得到一个谐振频率（反射系数S11 的最小值所对应的频率）为1.5GHz和1.43GHz，圆极化频率为1.46GHz，S11 小于-10dB 的相对带宽、驻波比小于2 的相对带宽约为8.8%，轴比小于3dB 的相对带宽约为2.2%的右旋圆极化微带天线的设计案例，从而很好的印证了圆极化微带天线理论，也充分证实了切角方形是一种切实可行的设计方案，而选取合适的调节枝则确能提高天线的性能。

Circular polarization is one of microwave equipment with broad application.its the mostly function is switch linearly - polarized wave into circular polarized wave.grating- circular polarization is one of circular polarization,its advantage is simple structure and ease of processing.it is prone to expand high power and high efficiency range.because circular polarization have expand application..

光栅圆极化器是其中的一种，它具有结构简单，加工实现容易，易于向高频率、高功率应用扩展等优点。

The article altogether divides into five parts, separately expositions the circular economy basic concept, the tax policy in the development circular economy function mechanism, the overseas development circular economy tax policy aspect model and the inspiration, our country develops the circular economy taxes and fees policy analysis as well as our country develops the circular economy tax policy suggestion.

文章共分为五个部分，分别论述了循环经济的基本概念，税收政策在发展循环经济中的作用机制，国外发展循环经济的税收政策方面的借鉴与启迪，我国发展循环经济的税费政策分析以及我国发展循环经济的税收政策建议。

"Second Life is remarkably easy to work with, and is very popular,"

"第二次生命是显着容易的工作，并且很受欢迎，"

For example, we usually assume that materials are homogeneous and isotropic and free of internal defects or flaws.

为了得到适合有限元分析的模型，我们必须经过如图2所示的简化步骤。