查询词典 Fowler's solution

H.伸缩环转动环伸缩环垫片前轴封 S D / L D / S L M E C H A N I C A L S E A L P U M P S SD/LD/SL SERIES PUMPS The SD/LD/SL series are dependable, self priming pumps. The full motor horsepower is translated into fow via the shaft. These pumps are used for a wide range of applications, from chemical transfer to process solution recirculation to waste treatment. This series is capable of self-priming up ro 20 feet of lift. The mechanical seal is a self-cooling, Tefon bellows which is cooled by the solution being pumped. The construction materials and seals avaiable make this pump extremely versatile. The horizontal design has a working temperature from167℉ to 194℉(75℃ to 90℃), depending on the material of construction, and can handle most chemical solutions. The SD/LD/SL series pumps are designed to run outside the tank or process module. The SD/LD series pumps incorporate a FRPP molded base, legs and pump-to-motor casing. There are no bolts or metallic parts in contact with the solution being pumped.

SD/LD/SL泵是可靠的自吸泵，马达全部的马力经由轴心完全转化为流量，此型泵广泛地使用於从化学药水循环或加工溶液循环到废水处理等各种用途，此型泵可自吸达20英呎，机械轴封是自我冷却的，经由抽送的溶液来冷却，可供应的不同结构材质及轴封使此种泵的用途非常多样化，依其结构材料的不同，其卧式设计的工作温度由75℃到90℃(167℉到194℉)，而且可处理绝大部份的各种溶液，SD/LD/SL是设计用於槽外或加工模组之用，SD/LD加入一个FRPP射出成型的脚座，脚架及泵到马达的外罩，没有螺栓或金属会接触到所抽送的溶液。

The molecular sieve is prepared in the steps: at the room temperature, hexadecyl trimethyl ammonium bromide is mixed and dissolved with the sodium hydroxide, and is added with TEOS in dropping way, and simultaneously added with Me metal salt water solution and lanthanum nitrate solution in dropping way; the pH value of the mixed solution is adjusted by acetic acid to be 10 to 11, and is mixed for 1 to 2 hours after being stabilized; the sol is moved into a polyfluortetraethylene bottle to be heated and crystallized for 2 days in the oven at the temperature of 100 DEG C; after filtering, washing and drying for nights, and being calcined in a muffle at the temperature of 550 DEG C for 3 to 7 hours, the dual-metal-atom improved MCM-41 mesoporous molecular sieve is obtained.

该分子筛的制备为室温下，将十六烷基三甲基溴化铵和氢氧化钠混合溶解，搅拌并滴加入TEOS，同时滴加入Me金属盐水溶液和硝酸镧溶液并搅拌，用乙酸调节pH值至10～11，稳定后搅拌1～2小时，溶胶转入聚四氟乙烯瓶中在100℃下烘箱水热晶化2天，经过滤、洗涤、干燥过夜，马弗炉550℃焙烧3-7h，得双金属原子改性MCM-41介孔分子筛产品。

The method is characterized in that the acid solution of one of hydrochloric acid, sulfuric acid, nitric acid, phosphoric acid and hydriodic acid is divided into two portions; aniline monomer and ammonium persulfate are respectively added; then aniline monomer solution and ammonium persulfate solution can be prepared.

一种乙酸松油酯的制备方法，其特征是，将盐酸、硫酸、硝酸、磷酸、氢碘酸中任一种酸溶液分成两等份，并分别加入苯胺单体和过硫酸铵，形成苯胺溶液和过硫酸铵溶液。

The color-projection waste solution consists of waste fixing solution and waste developing solution in which there is noble metal silver and some organic such as boric acid, hydroquinol, bromides.

彩扩废液包括废显影液和废定影液。

Chemically, fluoroquinlones are an amphoterics molecule processing major ionizable groups, a basic piperazine amine and acidic carboxyl. The form of drugs was greatly affected by the acidity in aqueous solution. Thus the effect of pH values in aqueous solution on the fluorescent properties of fluoroquinolones was studied in details, the spectral properties of each form was characterized. It was found that the fluoroquinolones exhibit weak fluorescence in strong basic solution.

氟喹诺酮类药物分子结构中既有羧基，又有哌嗪氨基，它们所处环境的pH值对其存在型体有很大影响，因此我们详细研究了水溶液的pH值对该类药物光谱特性的影响，并对于各型体光谱特征进行归属，发现强碱性溶液中其发光较弱。

It indicates that the raw materials can be stored in temperature of 0-4℃ for 60 days, they must be immersed in clean water for more than one hour before processing, and peeling be carried out in flowing water; that color preserving solution should be 1.0% NaCl+0.2% citric acid+0.5% Vitamin C+110ppm dichloro isocyanuric acid sodium; that combined browning inhibiting solution is conspicuously effective, and immersion time better be around 20 minutes; that sterilization solution ought to be 200ppm dichloro isocyanuric acid sodium+0.5% ascorbic acid+0.3 citric acid, and 10 minutes' immersion will achieve the effect of sterilization and inhibiting browning; and that after 20-21 minutes of quick-freezing in temperature of -31℃~-32℃, the products can be preserved under -18℃ for a whole year.

通过对速冻牛蒡加工过程中原料储存、削皮方法、护色、浸泡时间、无热杀菌、包装形式等参数进行研究表明：原料0-4℃可储存60天，加工前用清水浸泡1小时以上，削皮时在流水中进行，护色液筛选的1.0% NaCl＋0.2%柠檬酸＋0.5%维生素C十110ppm二氯异氰脲酸钠；复合褐变抑制溶液在抑制褐变方面有显著的效果，浸泡处理时间为20分钟为宜；杀菌液为200ppm二氯异氰脲酸钠＋0.5%抗坏血酸＋0.3柠檬酸，浸泡10分钟即可达到灭菌和抑制褐变的作用；经-31℃~-32℃温度下速冻20~21分钟，产品在-18℃条件下可储存一年。

In the acute toxicity experiments, the 96h-LC50 were 1.0×105 cells·mL-1 for the intact algal solution and 8.0×104 cells·mL-1 for the lysate. In a 7 day subacute experiment on the larvae, higher concentrations of algal solution inhibited S. macrocephalus larvae. The toxicity of the algal solution was higher than that of the lysate at the same concentration.

在仔鱼96h的急性毒性实验中，微小亚历山大藻对仔鱼的96h理论半致死浓度分别为1.0×105 cell·mL-1、8.0×104 cell·mL-1，而在7d的亚急性实验中，高浓度藻细胞液对仔鱼的生长发育有一定的抑制作用，且相同浓度下，藻细胞液产生的毒性较藻细胞破碎液大。

Raman spectrum of saturated aqueous solution of ammonium dimolybdate crystal was recorded, and compared with those of ammonium dimolybdate crystal , ammonium heptamolybdate crystal, saturated aqueous solution of ammonium heptamolybdate crystal and monomolybdate anion in aqueous solution respectively.

记录了常温下二钼酸铵晶体饱和水溶液的Raman光谱，并分别与二钼酸铵晶体、仲钼酸铵晶体、仲钼酸铵晶体饱和水溶液、水溶液状态下单钼酸根离子的Raman光谱进行了比较研究。

METHODS: 15 g/L silk fibroin solution was made by degumming, salvation and dialysis. Chitosan was dissolved in 2% acetic acid solution to prepare 25 g/L chitosan-acetic acid solution. Two solutions were mixed to prepare six silk fibroin/chitosan solutions, and mass ratio was 10: 0, 5: 5, 4: 6, 3: 7, 2: 8, 0: 10. These solutions were separately sucked in a 24-well plate. Following exhausting gas vacuole at 4 ℃, precooling was performed at -20 ℃ for 12 hours, followed by cryodesiccate for 30 hours.

通过脱胶、溶解、透析这3个主要步骤制成质量浓度为15 g/L的丝素溶液，将壳聚糖溶解在2%的醋酸溶液中制成25 g/L的壳聚糖-乙酸溶液，然后将两者混合，配制成丝素/壳聚糖质量比分别为10∶0，5∶5，4∶6，3∶7，2∶8，0∶10的6种溶液，分别吸入24孔板中，4 ℃排出气泡后，-20 ℃预冷冻12 h，再冷冻干燥30 h。

The method comprises heating up the lactic acid solution to gasify at 150-200 degree C, mixing the obtained mixed vapour of lactic acid and water with the carrier gas, entering into gas-solid catalytic reactor to get the reaction product gas by the action of a modified Y zeolite molecular sieve catalytic agent and dewatering after heating up the mixed gas to 200-450 degree C, obtaining the propenoic acid solution through gas-liquid dissociation after cooling the reaction product gas, obtaining coarse propenoic acid products form the propenoic acid solution by gas stripping, azeotropic distillation, extraction and rectification in turns.

其特征在于将乳酸水溶液加热至150～200℃气化得到的乳酸-水混合蒸气与载气混合，将混合后的气体继续加热到200～450℃后进入气-固相催化反应器中经改性Y沸石分子筛催化剂作用脱水得反应产物气体，反应产物气体冷却后经气液分离得到丙烯酸溶液，丙烯酸溶液再依次经过气提、共沸蒸馏或萃取、精馏得到粗丙烯酸产品。

The statistical analysis of this large set of mutations has led us to propose a diagnostic strategy that should help with the molecular work-up of optic neuropathies.

这一大系列基因突变的统计学分析引导我们提出一个诊断策略，可以帮助我们对视神经病变进行分子学的诊断检查。

The results show that the pipe grouting changes the mechanical parameters of surrounding rocks to achieve the security of engineering objectives by reinforcing surrounding rocks and bolcking the water.

研究表明：小导管注浆一方面改变了围岩的力学参数，另一方面利用浆液的固结特性可以实现堵水和加固围岩的工程目标，使隧道在开挖过程中的安全得到保障。