英语人>词典>汉英 : 性能 的英文翻译,例句
性能 的英文翻译、例句

性能

基本解释 (translations)
capability  ·  performance  ·  capabilities  ·  performances

更多网络例句与性能相关的网络例句 [注:此内容来源于网络,仅供参考]

Product characteristics : 1, excellent heat resistance : can adapt to the use of power lines due process overload and short circuit of the high temperature; 2, excellent electrical properties : material for the performance of their higher intensity and volume resistivity of insulation, security is good; 3. excellent corrosion resistance and anti-aging properties : apply to the soil and working environment, long life; 4. excellent flame retardance : difficult combustion; 5, smooth wall formation, the friction coefficient, good wear resistance : in the installation process can greatly reduce the damage to power lines, improve work efficiency; with the traditional asbestos cement pipes, the The product is light weight, good flexibility, earthquake-resistant and differential settlement, and not at the construction site encapsulation pouring concrete; Transport construction is simple, low cost, can greatly shorten the construction period.

产品特点: 1、优良的耐热性能:能适应电力电缆使用过程因过载短路而产生的高温; 2、优良的电气性能:材料自身表现为较高绝缘强度和体积电阻率,安全性好; 3、优异的耐腐蚀性能和抗老化性能:适用于各种土壤和工作环境,使用寿命长; 4、优良的阻燃性能:不易燃烧; 5、内壁光滑平整、摩擦系数小,耐磨性能好:在敷设过程中可大大降低对电缆的损害,提高工作效率;与传统的石棉水泥管相比,产品的重量轻、柔性好、抗震性及抗不均匀沉降好,无须在施工现场包封浇混凝土;运输施工简便,费用低,可大大缩短工期。

Using a large data set of 1 894 images,we examine whether the colorspace transformation can increase the compactness of skin distribution and the discriminability between skin and nonskin distributions in fourteen 3D colorspaces and fourteen 2D chrominance planes.

比较结果表明:(1)颜色空间的变换并不能改善肤色紧致性、肤色-非肤色可分辨性以及分类等性能,但RGB及线性变换空间却具有较好的类可分辨性和分类性能;(2)去除亮度信息将明显降低肤色和非肤色之间的可分辨性和分类性能;(3)Bayes决策下的3维SPM的分类性能是最优和空间无关的,而其余分类器则普遍存在类似的"空间偏好性";(4)同时采用肤色和非肤色模型的分类器的分类性能优于仅使用肤色模型的分类性能

The article is mainly used to evaluate the comfort of the end-product.

该模型主要应用于对成品的舒适性的评判;舒适性预测系统基于评判系统中所确定的织物客观舒适性能,采用倒推的方法,从织物的客观舒适性能逐级推导出对织物舒适性能的影响因素,最后确定预测指标,即以最基本的纤维性能、纱线性能及织物结构参数预测未来织物的舒适性能

Calculating the pavement fragment adoptioning contradicting -cleft -glue and glass fiber grille ,deal with the existing crevasse, at kaminaka surface layer install rubber asphalt water proof adhesive layer , at the same time guarding against water coming into nakashita surface layer、enhanced interlamination bonding ...

论文进行橡胶沥青混合料的主要试验内容有:1、根据京秦高速公路管理处提供的石料进行目标配比设计;2、进行混合料马歇尔击实及相关性能试验确定最佳油石比。3、根据冷料配比进行热料仓筛分,确定热料仓配比;4、根据热料仓配比进行马歇尔击实试验。4、进行混合料的路用性能试验,分析橡胶粉的掺入对沥青的高低温性能、弹性性能、抗老化性能的改善情况,分析橡胶粉的掺量、目数、胶源、加工工艺和基质沥青对橡胶沥青性能改善的影响程度。

The Solidification temperature range was defined as 110-200℃ by DSC analysis. More accelerant used can increase the casing samples dynamic performance, but more than enough accelerant can induce a severe solidified reaction that result in a smaller polymeric meshwork and reducing the sample's performance. Normally the Accelerant dosage can be 2 portions; The Epoxy resin CFRP has a obvious better performances than the Vinyl-ester Resin CFRP, i.e. had a Bend Strength of 1516MPa, LSS of 85MPa, also Tg raised to 195~C~ When used the end-carboxyl polyether to reinforce the epoxy resin, the casing sample's SS, BS and Crack Elongation all increased geminately. The CFRP performance also increased a little, that is because the performance of the CFRP mainly contributed by the CF. The reinforced resin improved the interface between the CF and resin that contribute to the little increasing.

通过DSC分析确定了该环氧树脂的固化温度范围为110~200℃,促进剂增加会提高浇注体力学性能,但过多的促进剂会使固化反应剧烈,聚合网络减小,使浇注体性能下降,一般用量为2份左右;以环氧树脂为基体的复合材料性能明显比以乙烯基酯树脂的性能提高,弯曲强度达到1516MPa,层间剪切强度达到85MPa,同时Tg也上升到195℃;用端羧基聚醚增韧环氧树脂后,其浇注体的拉伸强度、弯曲强度及断裂伸长都成倍增加,复合材料的性能也有所提高,但提高幅度不大,因为复合材料的力学性能主要由碳纤维承担,树脂增韧后改善了复合材料的界面性能

The details of the research include: By studying the structure of the natural bamboo fiber, make the basic morphological structure and the degree of crystallization clear; By studying the mechanical property of the fiber, make the feature of mechanical property of the natural bamboo fiber clear; By studying the mechanical property of the pure yarn and its blends, make the feature of mechanical property of the yarn clear; and we also study the mechanical property changes of the pure yarn and its blends in the hygrometric state different temperature state and after mercerization and alkali shrinkage.

研究内容包括:通过对天然竹原纤维结构的研究,探明竹原纤维的基本形态特征和结晶度等特征;通过对天然竹原纤维机械性能的研究,探明竹原纤维的力学性能特点;通过对竹原纤维纯纺、混纺纱线力学性能研究,探明其纱线的力学性能特点;研究在湿态条件下,竹原纤维纯纺、混纺纱线力学性能的变化特点;研究在不同温度条件下,竹原纤维纯纺、混纺纱线力学性能的变化特点;研究在丝光、碱缩条件下,竹原纤维纯纺、混纺纱线力学性能的变化特点。

This model will play an important role in the architectural optimization process of the Godson series microprocessors.超标量;微处理器;分析模型;性能分析;工作负载;微体系结构; MAMOsuperscalar; microprocessor; analytical model; performance evaluation; workload; microarchitecture; MAMO

作为基于详细模拟的处理器性能分析方法的补充,微处理器性能分析模型能够更加有效地分析处理器性能瓶颈,探索设计空间,也将在龙芯处理器的结构优化工作中发挥重要作用。

Two multifunctional agent, glycidyl methacrylate and refined ricinoleic acid , were adopted to modify EPDM in situ during compounding and vulcanization process. The effects of the modifiers on vulcanization behavior, processiability, different properties of the vulcanizates were investigated.

为此,选择了含有极性基团的多官能团小分子改性剂甲基丙烯酸缩水甘油酯和精制蓖麻油酸,在橡胶混炼和硫化过程中对EPDM进行原位改性,研究了原位反应技术对过氧化物硫化EPDM橡胶的反应特性、加工性能、力学性能、热性能、耐老化性能、耐屈挠疲劳性能及与金属的粘合强度等性能的影响,并探讨了其改性的机理。

PVA removing process is optimized by orthogonal test, and by use of analysis of variance method, factors which affect PVA removing result and the final quality of fabric are also studied. The PVA removing process is optimized. Comparing with twist woven plain fabric whose woven parameters are same to corresponding twistless fabric, properties of twistless woven fabric including breaking strength, tear strength, flex abrasion, air permeability, water vapour transmission, pilling resistance, drape, dimensional stability, wicking, and dyeing uptake are tested.

无捻纱机织物与有捻纱机织物(文中所提到的这两种织物的织物密度、纱线的号数等织造参数相同)的对比试验是本文的又一重点,本文通过对比试验,测试了织物的拉伸性能、撕破性能、顶破性能、耐磨性能、外观保持性、悬垂性、刚柔性、透气性、透水性、芯吸性能,绘出了上染速率曲线等,得到了大量的对比数据,并以数据为基础进行了分析,得出结论为:无捻纱织物具有良好的透湿、保暖、吸湿性能以及柔软的手感和较高的覆盖率,这些都证明了无捻纱机织物有良好的舒适性。

Based on these, an improving μ-synthesis is presented, with which the high-purity distillation is designed well. 2. The robust performance problem of MIMO plant is explained with the plant direction angle, which shows that the robust performance varies with different input uncertainties and the μ-synthesis should be applied correctly according to the uncertainty structure. 3. Condition number and bandwidth are the important items for robust performance design in MIMO system. The H〓 two-block problems can not deal with the robust performance design of MIMO system because of the condition number cancellation. A general μ-synthesis procedure for MIMO system with uncertainties is presented. 4. For the SISO system, the object function in robust performance is amplified by at most 〓 than that of H〓 two-block problems in value: So the robust performance of SISO system can be done with the H〓 two-block problems to avoid the complicated μ-synthesis procedure. 5. All the conclusions and methods presented in this paper are demonstrated by some typical design examples.

从而形成一种改进的μ综合方去,并对精馏塔病态对象进行了鲁棒性能设计,得到令人满意的结果;(2)利用对象的方向角解释了MIMO对象鲁棒性能设计出现问题的原因,并提出不同输入摄动形式下系统的鲁棒性能问题也并不相同,因此利用μ综合处理鲁棒性能设计时,应根据不同的摄动情况采用不同的结构进行设计:(3)条件数问题和带宽问题是MIMO系统鲁棒性能设计的两个主要问题,指出由于条件数对消的存在使得一般H〓两块问题无法处理MIMO系统的鲁棒性能设计,而μ综合方法则是处理MIMO系统鲁棒性能设计的有效方法,并给出了其处理MIMO系统鲁棒性能设计的一般性方法;(4)提出对于SISO系统H〓两块问题(S/T问题、S/KS问题)的设计指标函数与鲁棒性能设计的μ指标函数在数值上最大差〓倍,因此对于一般SISO系统的鲁棒性能设计可以简单地用一般的H〓的两块问题处理,而避免μ综合设计的复杂过程;(5)本文中提出的结论和算法都利用H〓/μ发展中的典型例子:Doyle-Stein问题,Safonov的战斗机模型,精馏塔对象等进行了设计验证。

更多网络解释与性能相关的网络解释 [注:此内容来源于网络,仅供参考]

capability:性能

这里指的应该是 性能(Capability) / 价格(Price) 吧!?其实2种都有人说 不过就高C/P值 越值得买的 方向解释 应该是指性能(Capability) / 价格(Price) 是吗??这里指的应该是 性能(Capability) / 价格(Price) 吧!?

CPS:控制性能标准

[关键词]频率控制 自动发电控制(AGC) 供应控制偏差(SCE) 服务提供者控制性能指标(SCPS) 控制性能标准(CPS)[摘要]华东电网引入北美电力可靠性委员会(NERC)的控制性能标准(CPS)起到了改善系统频率控制性能的作用,

behaviour in service:运转性能,使用性能

行为,动作,特性,性能,状态 behaviour | 运转性能,使用性能 behaviour in service | 命令,紧急指示 behest

performance maximizing:使性能达到最佳值

performance maintenance 性能维护 | performance maximizing 使性能达到最佳值 | performance measurement system 性能测量系统

moldability:造型性能;塑模性能

mold resistance 抗菌性能 | moldability 造型性能;塑模性能 | molded products 模制品

Motorcycle and moped parking performance requirements:摩托车和轻便摩托车驻车性能要求

汽车倒车灯配光性能 Photometric characteristics of reversing... | 摩托车和轻便摩托车驻车性能要求 Motorcycle and moped parking performance requirements | 摩托车和轻便摩托车驻车性能试验方法 Motorcycle and...

Performance optimization:性能状化

performance 性能 | performance optimization 性能状化 | performance test 性能测试

performance:性能

3.1.4 系统性能监视器 系统性能监视器 (System Performance Monitor)可从"开始"菜单,经由"程序" |"管理 工具"|"性能"(Performance)访问.它曾经是一个独立的工具,但是现在被集成到了 MMC系 统中.图3-4显示了系统性能监视器的缺省用户界面.

oil absorbency:吸油性能;油墨吸收性能

oil 油;石油;油类 | oil absorbency 吸油性能;油墨吸收性能 | oil absorption test 吸油性能试验;油墨吸收性能试验

oil absorptiveness:吸油性能;油墨吸收性能

oil absorption test 吸油性能试验;油墨吸收性能试验 | oil absorptiveness 吸油性能;油墨吸收性能 | oil and grease resistance 耐油脂性能