接合

By the way of melting the filler will also bring the diffusion and the capillary attraction, and that the same or different kinds of metal can be welded well without melting the original material, especially the different ones and the complicated shapes.

利用真空硬焊制程来克服Al、Cu焊接时所产生的困难，藉由填料熔融产生原子扩散及毛细现象在不熔融母材的情况下结合同种或异种金属，尤以异种材质的接合或形状复杂难以接合的工件，皆可达到良好的接合效果。

As comparing those three factors, abutment diameter had stronger influence on reducing bone stresses than connection depth did, and the influence of conically taper degree was less.

三项设计参数中，接合宽度对周围骨应力之影响性高於接合深度，而接合角度的影响性最小。

Methods Mating was conducted at 25℃ in saline between E.coli B101(RP4) and Salmonella aberdeen Kauffmann 50312 without stirring and the donor per recipient ratio was 1:3 constantly.

接合供体菌为大肠埃希菌-HB101(RP4)，受体菌为Salmonella aberdeen Kauffmann 50312，保持供、受体菌液浓度比例为1：3，25℃静止接合相应时间后，计算转接合子数。

Test and analytical studies indicated that (1) connection moment strengths in positive bending were similar but in negative bending were different on the order of 0.72 and 0.6 percent compared to the bare steel beam subassembly so that the self-centering behavior of the subassemblies with the composite concrete slab was not observed,(2) force-transferring mechanism in the connection proposed was able to predict the force-deformation relationship of the subassembly with the composite concrete slab, and (3) a general-purpose nonlinear finite element analysis program ABAQUS was used to perform the correlation study on the subassemblies with and without composite concrete slab.

实验结果显示(1)含楼版试体在千斤顶往正方向作用时的弯矩与未架设楼版试体接近，但在千斤顶往负方向作用时未架设楼版试体的弯矩分别约为含楼版试体的0.72%及0.6%，所以预力梁柱接合系统於钢梁上架设楼版，对预力系统自行复位的能力造成很大的影响、(2)由预力梁柱接合系统力量与位移间的关系利用迭代方法可以预测含楼版试体的行为、及(3)以有限元素分析程式模拟其中一组含非传统楼版试体以探讨含楼版预力接合系统在挠曲载重作用下的行为。

Zygospores are characteristic of the ZYGOMYCOTA, especially the Mucorales (which include such fungi as Mucor and Rhizopus) and the GAMOPHYTA (conjugating green algae, e.g. Spirogyra and Zygnema).

是接合菌纲的典型特征，特别是毛霉菌目 Mucorales(包括毛霉属 Mucor 和根霉属 Rhizopus 等真菌)以及接合藻类 Gamophyta(接合绿藻，例如：水绵属 Spirogyra 和双星藻属 Zygnema)。

A quick-release arrangement for a hand-held device (30) comprising a belt clip (10) and an engagement element (20), wherein the belt clip is adapted to fit on a user's belt or waistband, the engagement element is attachable to a hand-held device, and the belt clip has a retaining portion (17,18) shaped to slidably accept the engagement element to a limit point and to form an interference fit with the engagement element at said limit point.

一种用于一手持装置(30)的快速释放装置，包括一皮带夹(10)和一接合元件(20)，其中，该皮带夹适于装配在用户的皮带或腰带上，该接合元件可安装到一手持装置上，并且该皮带夹具有一保持部分(17，18)，所述保持部分成形为可滑动地接纳该接合元件至一限制点，并在所述限制点处与该接合元件形成干涉配合。

In order to obtain better characteristics of photonic crystal lasers, the wafer bonding technology is introduced to integrate MQWs wafer with different uncompatible wafers. We utilize the direct bonding method and glue bonding method to integrate the 1550nm long-wavelength MQWs with DBR wafer or sapphire. The effect factors of bonding process and choice of bonding materials are discussed. At last, we measure the photoluminescence spectra of our membrane devices and bonding samples.

为了得到更好的光谱特性，我们介绍了各种晶圆接合技术去整合含有多层量子井结构的晶圆与其不相容的材料，我们利用直接接合和溶胶接合的方法去接合1550nm长波长的多层量子井晶圆与含有DBR结构的晶圆或sapphire，并对於各种接合影响因素与材料的选择加以讨论，最后再对我们的层状光子晶体雷射和晶圆接合后的样本做量测。

When the lock ring simultaneously with the question cone gear engagement ring gear, cone after contact friction moment in the role of the rapid speed of gear to reduce to synchronize with the speed equivalent to lock ring, the two synchronous rotation, relative to gear Central lock synchronization speed is zero, thus inertia torque also disappeared, then in force under the impetus of engagement sets unhindered and synchronization lock Gear engagement ring, and further engagement with the question of gear engagement ring gear and completed Shift process The topics mainly through the Pro / E synchronization software for the car to three-dimensional modeling structural design, and through the parameters of the design process to achieve its structure, and on this basis, the use of ANSYS FEM software structure of the typical synchronization And a finite element analysis, through structural analysis of its structural design is reasonable to assess and make recommendations to improve the design

当同步锁环内锥面与待接合齿轮齿圈外锥面接触后，在摩擦力矩的作用下齿轮转速迅速降低到与同步锁环转速相等，两者同步旋转，齿轮相对于同步锁环的转速为零，因而惯性力矩也同时消失，这时在作用力的推动下，接合套不受阻碍地与同步锁环齿圈接合，并进一步与待接合齿轮的齿圈接合而完成换档过程本课题主要是通过Pro/E软件对汽车同步器进行三维造型结构设计，并通过参数化实现其结构设计程序化，在此基础上，利用ANSYS有限元软件对典型同步器结构进行有限元计算与分析，通过结构分析对其结构设计的合理性作出评价并提出改进设计建议

For single-electrode, its interface region is slowly expanding out, the residual gas washer will be evicted Bubble formation is not easy, the interface quality is very good, but the bonding speed has been rather slow.

对於单点式电极，其接合区域是慢慢扩张出去，因此接合面的残存气体也会被驱赶出去，不易形成气泡，接合品质相当好，但接合速度相当缓慢。

8 Splices 接合 Conductors will be spliced or joined with devices identified for such use or by brazing, welding, or soldering with a fusible alloy or metal.

导体要用确定适合其用途的装置或者通过铜焊，电焊或锡焊等用一可熔的合金或金属进行接合或连接。

We are interested in your suggestions about appointing us to be the single dealer.

对贵方建议由我方担任独家经销商一事，我们颇感兴趣。

Three types of empty-shell marriages have been identified. In a devitalized relationship husband and wife lack excitement or any real interest in their spouse or their marriage.

一种是死气沉沉的婚姻：在这种婚姻关系中夫妻俩对于配偶或婚姻缺乏激情，或者缺乏真正的兴趣。