查询词典 stimulus error

The conditions to measure accurately and the principles to select parameters of the multi— probes EST method are proposed, and the theoretical research, computer imitation and the experiment on a machine tool prove that these principles and suggestion are necessary and effective. The influence of the initial value errors of the probes, the installation error of the probes system, and the remaining error caused by the radical error motion are analyzed quantitively on the measurement accuracy of the multi—probes EST method. The influence of the error caused by the probe's axes which is not in a plane and the perpendicularity error of the plane which the probe's axes is in to the stational axis are discussed on the measurement results.

结合理论分析，对这些EST方法进行了计算机仿真分析和研究，重点研究了这些方法的应用条件和误差分离精度，所得出的结论是：三测头法EST基本上能实现各项误差的完全分离，适于在位测量使用；二测头法在恰当地选择测头安装角的条件下，可以得到较高测量精度，适于大型零件圆度、圆柱度、径向圆跳动和全跳动的在位测量；对置两测头时域法可以在一定程度上改善单测头法测量精度，但对随机径向误差无能为力；对置两测头频域法存在严重的谐波损失。

A commutation error is then considered in addition to the conventional residual error to generate the innovative residual error. Such an error is applied into cost functions to derive finite impulse response and infinite impulse response filter-based adaptive algorithms for ANC applications, referred to as FxRLS/CE and FuRLS/FRE+CE algorithms, respectively. Convergence analyses based on Lyapunov stability criteria for time-varying discrete-time systems can be carried out for the FxLMS/CE, FxRLS/CE and FuRLS/ FRE+CE algorithms to ensure stability. Computer simulations and experiments demonstrate that the innovative residual error-based adaptive algorithms can free the restriction of the slow-adaptation assumption in the conventional ANC approaches.

本文中也定义一交换误差并且加入到传统残留误差行形成新残留误差来改善适应性演算法的收敛速度，使用新残留误差推导出了有限脉冲响应滤波器与无限脉冲响应滤波器之适应演算法的新适应性演算法分别为： FxLMS/CE、 FxRLS/CE 和 FuRLS/FRE+CE 演算法，并且以离散时间的 Lyapunov 稳定性准则来证明演算法的收敛性，电脑模拟与实验也显示新演算法免除以往滤波器的参数必须缓慢更新的条件。

In order to evaluate aiming error of missile on the warship or on the submarine, including the error of warship position, the error of reference azimuth and the error of transfer measurement given by the navigation system, and try to divided them from the general error, it is highly important that we estimate and evaluate missile system of mobile bedding launching.

为了评估从舰船／潜艇上发射导弹的瞄准误差，包括舰船导航系统给定的船位误差、基准方位误差及其传递测量误差，并试图把它们从总的瞄准误差中分离出来，这对于动基座发射导弹武器的瞄准精度的评价极为重要。

Using the a hand-hold GPS and wireless transmitting unit to rapidly locate the fire and determine the rate of fire spread, which also offered an indispensable way of verifying the speed of forest fire appealing. Discussing the representation and Computing Method of the simulate calculation error based on the thorough investigation of the sources of simulate calculation error. Pointing out that the speed and directional error are the root of forest fire appealing simulates error. Thus increasing the parameter of error correction is an effect way of reducing systematicsimulationerrors.

4提出了一种利用手持GPS和无线传输设备来快速测定火场位置和林火实际蔓延速度的方法，为林火蔓延模拟速度验证提供了必要的手段；对林火蔓延模拟误差的来源进行了全面分析，探讨了林火蔓延误差的表现形式和计算方法，指出了林火蔓延速度误差和蔓延方向误差是林火蔓延误差产生的根源，提出了通过增加系统误差修正参数来减少系统模拟误差的有效方法。

The monotony and extremum theory of function are applied to prove the geometrical characteristic of error hand for 2D linear segment uncertainty ε(subscript σ) model in theory. The result shows that the error hand has the geometrical shape of "larger ends and smaller middle" or "one end larger and the other smaller". The minimum width and its exact position of the error hand are calculated too. It is proved that the minimum width position of the error hand is near the end with the smaller mean square error.

运用函数单调性和极值理论，从理论上证明ε模型的误差带的几何特征；得到线元误差带不仅具有&两端大、中同小&，而且也可能具有&一端大、一端小&的几何形状；给出了误差带的最小带宽及其位置；论证了误差带的最小误差带宽的位置靠近中误差较小的一端。

For the all classes of dies, if we analyse the fluctuate, tendency of increase and decrease and law which appeared in the die's whole life, we will find that the master of the error are changeless; the error that because the abrade of the cutter and impression will be as the cutter grinding times increased at the same time. And that will cause the error oversize gradually; and also have another part error are unconventional , unforeseen.

对各类冲模冲件误差在冲模整个寿命中出现的波动、增减趋向及规律等进行全面分析便可发现：冲件误差的主导部分是不变的；因刃口或型腔的自然磨损而出现的误差增量随冲模刃磨冲数增加而使这部分误差逐渐加大；还有部分误差的增量是非常规的、不可预见的。

Because of fault in operation and the precision of instrument,the defect error and accidental error are involved in the procession of data collection,the defect error that are brought by mistakes of people and influence of outside is large,the contingency error that are inevitably and randomicity is little.

在采集数据过程中，由于某些操作或仪器原因，往往使数据中包含人为错误，或外界干扰产生的量值较大的"过失误差"以及不可避免的带随机性质且量值较小的"偶然误差"。

After analyzing the main error sources in the system, it discusses the error separation and error compensation of parts of the error source.

在分析了系统的主要误差源后，本论文重点研究了部分测量误差的分离补偿与修正。

Error analysis of digital instruments on their characteristic parts including sample/holder circuit error and analogue/digital convector error was reviewed in this paper. With the help of some examples and data tables, error origins and the synthetic method were discussed.

评价了数显仪特征部分误差分析方法，包括：采样／保持电路、模数转换单元的误差，并通过典型例子和列表数据分析了多种误差源及其综合计算方法。

Relation between geometrical contour error of inner corner and machining condition is investigated by the experimental plan of Taguchi quality design. Through the quantitative analysis, the geometrical contour error is mainly affected by wire tension and flushing pressure. By regression analysis, a mathematical model is established to estimate cutting path error of corner cutting. According to the estimated cutting path error, the program path is corrected.

研究首先以田口式品质设计实验计画法来探讨加工参数与隅角形状误差间的关系，从变异数分析的结果得知，线张力与冲水压力是对於隅角精度影响最显著因子，应用回归分析建立转角加工路径误差量估测模式，利用此模式以预测不同加工条件下隅角加工路径误差量，依据预测加工路径误差量计算轨迹补偿量，实验结果证明本文所提出轨迹补偿策略可有效提高60%之隅角加工精度。

Objective:To compare the response control and attention of Schizophrenic patients with that of the healthy controls by Integrated Visual and Auditorycontinuous performance test. To quantitate the impairment of cognitive function in patients, and to explore the relationship between cognitive function and the severity of the disorder.

目的：探讨精神分裂症病人在IVA持续操作测试中的反应控制能力、注意力等，并与健康人进行比较，从而量化精神分裂症病人的认知功能损害，并进一步探讨其认知功能与疾病严重程度的关系。

Main effective factors including subcooling degree, mechanical vibration, gas hydrate reformation, environment temperature, noncondensing gas and surfactant are analyzed.

指出过冷度、机械振动、重复生成水合物、环境温度、不凝性气体、添加剂是影响气体水合物生成的主要因素，还对R152a水合物的放冷进行了实验研究。